Axial “SCX10JK” tested – Moab, Utah for Easter Jeep Safari 2012

As we continue to build up our 2012 Jeep Rubicon we couldn’t help but notice the online buzz about Easter Jeep Safari in Moab, UT. The entire Rebel Off Road group were preparing their Jeeps for the event whilst putting time into our SCX10JK project. We decided that there was no better place to test our Jeep’s ability than to hit the world famous Moab rock trails. Moab has long been considered a Jeeper’s paradise, with roads that stretch hundreds of miles allowing people to enjoy some of the most beautiful scenery in the USA. Our “SCX10JK” wasn’t completely finished (is any rig ever really finished?), but we figured it was in a state of completion that would suit traveling the world famous Moab trails, hopefully without drama.

We requested some time from our internal graphics master Scott Roberts to whip up some art for the JK. He was extremely busy with Axial day to day operations, so we requested that he keep it simple and clean. We wanted to make sure our partners had a little exposure on the side of the Jeep as well as adding a little character to our rig. Scott whipped up some nice simple graphics for us and took the time to install them over at Rebel Off Road. Thank you Scott!

The first spot we hit was Hell’s Revenge. This particular trail is strange in that you drive your vehicle on a literal sea of rock. You simply follow the rubber marks from past travelers and negotiate a rollercoaster of winding trails. This place has a surface unlike anything I have ever seen. They call it slick rock, but the reality is… it is anything but slick. Instead it is like sandpaper and offers a tremendous amount of grip. It is possible to walk up near vertical faces in your plain old skate shoes!

There are some very cool breaks in the rock sea where there are winding sand trails

There are also a few ledges you must climb up

Bond from Rebel Off Road was our fearless leader on this run, he and his entire group of Jeepers are all awesome people to roll the trail with.

Bond’s Jeep

My ride for the trip was with Jason from Rebel, this Jeep is so awesome!!!

Here we are stopped for lunch!

To learn more about Hell’s revenge,click here

The next adventure we went on was on a trail called Metal Masher, this has to be one of the most beautiful places I have ever been! This trail winds up the side of a mountain and eventually takes you to a plateau overlooking Beautiful Moab, Ut.

Bond always makes the rounds to discuss what the trail has to offer and makes sure everyone is fully prepared for adventure, Thanks Bond!

Bond and his extremely well prepared JK always takes the bonus lines!

Some of the dry waterfalls and steps you get to drive up on this trail are absolutely amazing!!

This trail is loaded with optional more challenging lines; this was one of those advanced lines, amazing what these Jeeps are capable of!

Bond needed a little help getting over this one, so Jason stepped up to lend a hand :)

The Jeep experience is really cool. When the group reaches an obstacle, they all gather around and watch each other give it a shot. It is awesome to see so many people work together to make sure everyone enjoys their experience!

The terrain of this place is mind blowing!!

Rolling through beautiful Moab with a group of likeminded enthusiasts is surreal, as is the capabilities of this rig, JR… You have a sick Jeep my friend!!

Every time we would stop for an obstacle, the Axial RC rigs would come out and offer the youngsters a chance to get some of their own crawling done!

To learn more about Metal Masher click here.

We have successfully put the Axial “SCX10JK” through its paces, and as projected, it performed flawlessly! The combination of parts we selected to arm this JK for battle, were absolutely perfect! The body protection from Poison Spyder did its job, only experiencing minor scrapes, the wheel and tire combo from Walker Evans Racing and Maxxis offered tons of strength and traction, the Suspension system from Icon flexed when needed and offered excellent ride quality both on road and off road. The Spicer equipped drive shafts propelled us to incredible places, the crew at Rebel Off Road did a tremendous job preparing the JK and guiding us through some of the most incredible terrain on earth! You will have to wait to get a report on the TJM winch and recovery equipment, as of yet, we haven’t had to use it!

To get the history on the Axial “SCX10JK”, please check out the following links! Be sure to check back often, as we will continue to build up the SCX10JK and fine tune it for maximum performance!

The Full Size Connection

Axial 2012 Jeep Wrangler Rubicon Unlimited

Axial Visits Rebel Off Road

Axial “SCX10JK” – Icon Suspension

Axial “SCX10JK” Armor – Poison Spyder Crusher Flares and Crusher Corners

Axial “SCX10JK” Armor – Poison Spyder Rocker Armor and Rocker Knockers

Axial “SCX10JK” Armor – Skid Plates from Rebel Off Road

Axial “SCX10JK” Walker Evans Wheels – Maxxis Tires – Rebel Roof Rack

Axial “SCX10JK” Armor – Poison Spyder Front and Rear Bumpers – TJM Winch

OFFICIAL SPONSORS OF AWCC FINALS 2011 – Cisco Grove, CA

OFFICIAL SPONSORS OF AWCC 2011
Vanquish | Tekin | MaxAmps | Futaba | PIAA | TJM USA | Dragon | PureFit | Mechanix Wear | Oliver Knives | CamelBak

Vanquish Products
Home of new and imaginative products. Vanquish products are all designed, manufactured, packaged, and shipped from all under one roof at the small Vanquish factory in Sacramento California. The Vanquish product line address several hobby products with a desire to make better and try to raise the performance bar. Visit us often as we are adding new products daily.
www.vanquishproducts.com

TEKIN
Designs and manufactures “Smarter-Smaller-Faster” electronic components including motors, speed controllers and battery chargers. USA.
www.teamtekin.com

MAXAMPS
The industry leader for high-quality LiPo, LiFe and NiMh batteries for air, water and surface RC products. MaxAmps packs are made to order same day and are assembled in the USA. All battery packs include a 3-year 300-cycle warranty at no additional charge.
www.maxamps.com

FUTABA
Futaba Denshi was established in 1948 as a manufacturer and seller of receiver vacuum tubes. Utilizing vacuum tube technology, Futaba began manufacturing fluorescent tube displays. In 1962 Futaba began producing radio control equipment as well as press and punching die components, establishing what still remains as two of the company’s primary divisions. This was followed by the development of mold base components and digital position readout systems, and the more recent addition of Vacuum Fluorescent Display tube modules to complete the lineup of Futaba’s major products. Firmly embracing the principle of manufacturing each component in-house, Futaba creates everything from its own tools to its own manufacturing facilities. The soundness of this strategy is validated by our ever growing list of awards for consistent, high-quality products. Today Futaba Corporation is the world leader in Vacuum Fluorescent Flat Panel Display (VFD) used in automotive and consumer products and Radio Control Systems for both hobby and industrial applications.
www.futaba-rc.com

PIAA
PIAA Corporation was established in 1963 with the commitment to manufacture world-class products that our customers could use with pride and confidence. Then, PIAA built its reputation with winning products. We became the industry leader thanks to our race-proven, easy-to-install lamps and bulbs and lifetime warranty. Our product quality and service stands apart. As does our race results. Baja 1000. Paris-Dakar. SCORE Offroad. 24 Hours of Daytona. US Pro Rally. 12 Hours ATV America. Moto-ST. PIAA helped win them all. Repeatedly.
www.piaa.com

TJM USA
Back in the 70’s when 4WD’s were few and far between, three adventure seeking mates got their ‘off road thrill’ with customised Volkswagen Beetles supped up as beach buggies. Each fitted with custom made bull bars, roll bars and sand tyres – they drew the attention of friends and bystanders. Before long, Lloyd Taylor, Cliff Jones and Steve Mollenhauer were making hand-made custom bars for a growing number of fans. As the demand continued to grow, they decided it was time to get serious. In 1973, with little more than their combined initials, shared passion and appreciation for quality products – TJM was founded and the rest is history. They were pioneers and TJM became the first company in Australia to manufacture and distribute quality 4WD equipment. Our product range has extensively grown to include; steel and alloy bull bars, nudge bars, side and rear protection bars, side steps, trade racks, roof racks, TJM recovery equipment, TJM winches, TJM XGS suspension, Airtec snorkels, TJM Pro Lockers and TJM roof top tents & awnings. While TJM has grown to be a sophisticated operation, we have never forgotten the key elements that resulted in the formation of the brand.
TJM-USA FaceBook

DRAGON
Since the beginning, Dragon set out to be the leading independent eyewear and accessories brand in the active youth lifestyle market by supporting the best athletes with the best product, while remaining connected to core retailers and consumers. That mission still holds true today and is the driving force behind the company’s success and heritage. In 1993, in a garage in Capo Beach, CA, founder Will Howard aimed to build a company that encompassed his passions for surfing, snowboarding, and riding dirt bikes. Enthusiasm and knowledge of the market bore Dragon’s first and still primary product, sunglasses. The company began distributing to local surf shops before expanding to Hawaii and Florida, and later Australia and other international markets. Dragon gradually extended its reach as well, developing innovative, diversified products in all eyewear categories. With an emphasis on creating functional, high-quality merchandise that appealed to the youth market and pushed the status quo, Dragon introduced a number of innovative products early on. “We saw an opportunity to add snow goggles to the lineup by aligning ourselves with the emerging snowboard market,” says founder Will Howard. “We loved riding and realized snowboarders were treated as second-class citizens just like we were as a start-up, so we thought that would be a good match.” From there, Dragon recruited snowboarders Jamie Lynn, Chris Roach, and a few others. Many years and many ride days later, Dragon has established itself as a leader in the snow goggle business. More recently, Dragon’s innovative approach has lead to further market-leading developments, including the first-ever sunglasses and goggles made from 100% renewable origins. The development of the ECO (Environmentally Conscious Optics) series, a product originally inspired by longtime Dragon team surfer Rob Machado, represents the ambitious, avant-garde, athlete-inspired mindset that Dragon was founded upon. Through it all, Dragon has continued to be true to its roots. Original snow team rider Jamie Lynn, along with Dragon’s first surf team rider, Shane Dorian, remain on the team roster today. With top-tier product and athletes in mind, Dragon’s roster has grown to include some of the best surfers, snowboarders, moto riders, and wakeboarders in the world. Still run by the founder, Dragon remains a youthful, free-thinking, alternative, edgy brand that appeals to the core participants of action sports. Dragon endures as one of the few independent brands in its field, and will continue to grow and lead the youth lifestyle market.
www.dragonalliance.com

PUREFIT
We provide the key to your optimum health. PureFit was established in July 2000 with the express purpose of educating individuals about how to achieve optimum health and fitness through nutrition and exercise. With an extensive background in health and exercise physiology, Robb Dorf set out to design a program that would help individuals not only burn excess body fat but also improve overall wellness. Concerned with current trends in nutritional supplements that contain highly processed or even harmful ingredients, Robb conducted research that led him to production of Peanut Butter Crunch, an all-natural supplement to the PureFit Fat-Burning System. The emphasis on natural ingredients in our bars is a hallmark of the PureFit philosophy, which strives for a complete approach to health and fitness.
www.purefit.com

MECHANIX WEAR
Back in 1991, we knew right away we had a good thing going with Mechanix Wear® Gloves. We had no idea what kind of revolution we would start. From the first use of Mechanix Wear® “Original” Gloves by pit crew teams at the Daytona 500, Mechanix Wear® gloves have been the leader in the high performance work glove market. Before we knew it, we had 41 NASCAR® teams asking for our gloves along with just about every other high profile motorsports team in every type of racing! As a result of the exposure, everyday mechanics, technicians, construction workers, Do-It-Yourselfers, industrial safety, emergency services, and military professionals all benefit from our products. Every Mechanix Wear® product represents a total commitment to its intended use. We consider everything: fit, feel, function, durability, quality, style and value. There is a lot of dedication and pride in everything we do, and it all adds up to superior performing products for you, our valued customer. Whether you’re jumping the pit wall at Daytona or just doing a little tune up in the garage, you can have complete confidence that Mechanix Wear® products offer you the best protection in the industry. Mechanix Wear® gloves are for more than just racing, they are for toolboxes everywhere.
www.mechanix.com

OLIVER KNIVES
Dwane Oliver – Custom knife maker since 2004. As many people do, I enjoy a good knife, only problem was I couldn’t afford one. Solution … learn to make knives. I am a self taught maker. I learned a lot from the Internet, a wonderful tool. I began making custom handmade knives in 2004. I do not use grinding jigs or CNC machines, these knives are all hand-made and shaped. I have sold knives all over the United States, Ireland, England , and Australia. I had several knives in the Iraq war and with my sons in the Marine Corps.

As with all of my knives, the G6 SK (G6 denotes the RECON G6 Challenge and SK denotes Survival Knife) is made to stand the test of time. The High Carbon 1095 Steel is precision ground (by my 2 hands) to a rugged size with a durable edge. The handle materials on a G6 SK are chosen for their durability in any conditions, wet or dry, hot or cold. Handles are always textured to give maximum grip , even is slippery situations. Removable Ferrocerium firesteel is placed in the handle to get you out of a tough spot on a cold night. Add a good Para-Cord lanyard, and you have the makings of a real tool for the outdoor adventure seeker. The Kydex sheath is heat molded to each individual knife. The tubular rivets that hold the sheath together are grouped in a Tek-Lok or a Molle-Lok pattern. Handling the G6 SK is truly ambidextrous and can be worn in any direction.
http://www.facebook.com/OliverKnivesGroup

CAMELBAK
AN IDEA BORN FROM THE MOST BASIC HUMAN NEED — THIRST
It’s 1988. Bicycle enthusiast, Michael Eidson, is competing in the “Hotter’N Hell 100.” And that’s exactly what it is: a 100-mile road race in the grueling summer heat of Wichita Falls, Texas. Water is vital to surviving the race, and there are few places to refill a water bottle. Eidson, an emergency medical technician by trade, decides to fill an IV bag with water and slip it into a white tube sock. Yes, a tube sock. Then he stuffs the contraption into the back of his bike jersey, throws the thin hose over his shoulder and clamps it with a clothespin. Hands-free hydration is born. And Eidson is able to drink as he pedals…while the other racers laugh and fiddle with their water bottles.

OPERATION HYDRATION — THE ROAD TO SURVIVAL
Jeff Wemmer, a competitive cyclist who fell hard for CamelBak, was so impressed by the product that he started bringing packs to races to sell them. Talk about a fan. CamelBak eventually hired him, and in 1993, Jeff embarked on a road trip to keep the start-up running during very tough times. Company lore has it that Jeff visited bike shops from Florida to California, pitching our renegade product from the back of his motorcycle. Each order Jeff faxed back to the factory literally breathed another day of life back into CamelBak.

THE REST IS HISTORY
It took courage, conviction and imagination to evolve from an IV bag in a tube sock sold by a motorcycle-driven sales force of one. Our core values remain the same and drive everything we do – from inventing the hydration category to becoming the world’s leading maker of hydration solutions. Oh yeah…about those bikers who laughed at Eidson? Well, chances are they’ve got a CamelBak strapped to their back or in their bike cage these days. Go figure…
www.camelbak.com

CLICK FOR MORE INFO ON AWCC 2011