Full Option RTR Deadbolt

blog_deadbolt_option

Axial offers several optional upgrade parts for the RTR Deadbolt. Here is a quick run down of what is installed and why you may want to use these items.

A couple photos of the fully option RTR Deadbolt. Axial also offers clear replacement Deadbolt bodies, part number AX04039, for those that want to customize the look of their trucks.
DSC_0092

First option parts that can be seen here are the 2.2 Maxxis Trepador tires in our sticky R35 compound, part number AX12022. We also installed our VMS beadlock wheels, part number AX08061. We will cover more on the VMS wheels later on in this article.
DSC_0096

Body off shot!
DSC_0100

Next option part we installed is a 25t aluminum servo horn, part number AX30836. Axial’s HD aluminum servo horn provides more responsive steering with less chance of stripping the internal splines over the stock plastic servo horn. Clamping style head for secure mounting in high stress applications. Available in 23, 24 and 25 tooth spline counts.

Axial’s HD differential covers, part number AX30829. HD diff covers protect ring and pinion gears from being damaged by rocks, just like their 1:1 counterparts, all while adding a little bling to your ride.

Aluminum axle lockouts are another available option, part number AX30789. Axial’s aluminum axle lockouts are more rigid than the stock plastic lockouts, which will allow the vehicle to track better in all situations.

Another great upgrade is Axial’s aluminum shocks, part number AX30092. Aluminum shocks provide better dampening than the stock plastic shocks, especially when mated with our Delrin shock pistons. Aluminum shock bodies also dissipate heat better than the stock plastic bodies. Oversize 3.5mm shock shafts for rigidity. Great for high power applications and long run times. Axial also offer a complete line of various springs to fine tune your suspension as needed, see the complete parts list below for more info.

Another option part that is hiding behind the HD diff cover is Axial’s HD ring and pinion gears, part number AX30395. HD ring and pinion gears are more efficient than the stock aluminum ring and pinions. CNC machined for precision. Hardened steel for durability. Great for high power applications. Axial also offers hardened steel overdrive ring and pinion gear sets, part number AX30401, for a little extra wheel speed. We also offer an underdrive ring and pinion gear sets, part number AX30402, for a little more torque in binds.

Axial’s HD lower link mounts are another noteworthy upgrade, part number AX30830. Our HD lower link mounts allow users to fine tune ride height and wheelbase by providing more adjustment holes than the stock plastic units.

You can see a handful of options parts in this photo. First option is the aluminum knuckles, part number AX30760. Aluminum knuckles provide more responsive steering and help your vehicle track better at speeds and in the rocks. Another option shown is the Axial Aluminum C-hubs, part number AX30762. Aluminum C-hubs also help your vehicle track more consistently in all situations, especailly when used in conjunction with our aluminum knuckles. Also notice the AR60 universal axles, part number AX30780. Axial universal joint axles increase steering angle to 50 degrees, that’s 60% over the stock dogbone/drive cup setup. These universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; typical for 1/8 scale vehicles and made of hardened steel so it’s capable of handling extreme power.

Our intention with this project was to build a solid axled basher that can handle a lot of power. Axial’s Vanguard Brushless System was the perfect fit to supply that power. The 2900KV brushless motor, part number AX24010, is more efficient that standard brushed motors and provides a lot more power for hill climbs and general monster truck style bashing over the stock set-up. Providing control for the brushless motor is our Vanguard ESC, part number AX24260. The Vanguard ESC has an array of features that can be programmed manually or with a Castle Link. Highlighted features include adjustable drag brake, lipo cutoff, traction control, motor timing, etc. Our Vanguard ESC is compatible with both brushed and brushless motors, so it can be run with either configuration. Standard Deans® Ultra Plug® battery connector included.

Another great upgrade is the Wraith Stage One link kit, part number AX30797. This kit is geared towards the Wraith, but also works great with the Deadbolt. Especially if you are going to compete at rock crawling competitions, as the wheelbase falls just under the 12 1/2″ max wheelbase limit. Our Stage One link Kit replaces all the stock plastic suspension links with high quality 7mm diameter aluminum links. Eliminates axle wrap and unwanted axle steer, especially in high power applications. Axial also offers machined heavy duty aluminum straight links, part number AX30790, to replace the stock plastic lower links as an alternative the the Stage One link kit.

Axial’s HD motor plate, part number AX30860. Our heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist! Axial also offers 13t, 14t and 15t steel pinion gears and an 80t spur gear to give end users an array of gear ratios to choose from. Add more torque for low speed crawling to your Deadbolt by installing one of Axial’s optional brushed motors available in 27t and 55t configurations. Axial also offers a complete steel transmission gear set for even more durability, part number AX30708.

Once again for wheels we went with our VWS beadlocks, part number AX08061. VWS wheels allow users to tune foam set-ups and change tires at will for varying terrain and conditions. Another wheel option offered by Axial is our black 8 hole beadlock wheels, part number AX8097. These wheels offer a little wider overall stance which equals stability at high speeds. For low speed rock crawling you can increase your Deadbolt’s climbing abilities by adding Axial’s 2.2 Internal Weight Rings, part number AX30545. Add even more weight by utilizing Axial’s 2.2 Internal Wheel Weights for the Internal Wheel Weight Rings, part number AX30546.

You can see our R35 Ripsaw tires pictured here, part number AX12015. R35 Ripsaw tires offer both a realistic look for the image-conscious scale crawler and for those looking to up their performance game. This 2.2 Ripsaw offers an aggressive tread design, greater ground clearance, and is made from a R35 sticky compound. The VWS wheels include black aluminum rings, but I swapped those out for our Grey beadlock rings, part number AX08133, just to match the grey colored suspension links.

Complete Deadbolt option parts list:
AX8097 – 2.2 Black 8 Hole Beadlock Wheels (x2)
AX08061 – 2.2 VWS Beadlock Wheels (x2)
AX08133 – Grey VWS Beadlock Rings (x2)
AX08141 – 2.2 Trail Ready Beadlock Wheel – Black (x2)
AX08142 – 2.2 Trail Ready Beadlock Wheel – Black and Chrome (x2)
AX12015 – 2.2 R35 Ripsaw Tires (x2)
AX12022 – 2.2 Maxxis Trepador Tires (x2)
AX12021 – 2.2 BFGoodrich Krawler T/A Tires (x2)
AX30545 – 2.2 Internal Wheel Weight Rings (x2)
AX30546 – 2.2 Wheel Weight Inserts (x2)
AX30797 – Stage One Link Kit
AX30790 – Machined Heavy Duty Aluminum Straight Link 101mm (x2)
AX30469 – Machined Heavy Duty Aluminum High Clearance Upper Links (x2)
AX80057 – XR10 Linkage Set (x4 for all 8 links)
AX30395 – HD Ring and Pinion Gear Sets (stock gear ratio) (x2)
AX30401 – Overdrive HD Ring and Pinion Gear Sets (x2)
AX30402 – Underdrive HD Ring and Pinion Gear Sets (x2)
AX30571 – 13t Steel Pinion Gear
AX30569 – 14t Steel Pinion Gear
AX30573 – 15t Steel Pinion Gear
AX30665 – 80t Spur Gear
AX30708 – Steel Transmission Gear Set
AX30829 – HD Differential Covers (x2)
AX30860 – HD Motor Plate
AX30830 – HD Link Mounts (x2)
AX30834 – 23t HD Servo Horn
AX30835 – 24t HD Servo Horn
AX30836 – 25t HD Servo Horn
AX30762 – Aluminum Axle C-hub’s
AX30760 – Aluminum Knuckles
AX30789 – Aluminum Axle Lockouts
AX30092 – Aluminum Shocks (x2)
AX30780 – AR60 Universal Axle Set
AX24260 – AE-3 Vanguard ESC
AX24010 – Vanguard 2900KV Brushless Motor
AX24007 – 55 Turn Motor
AX24004 – 27 Turn Motor
AX04032 – Clear Ridgecrest Body
AX30223 – Black Springs 1.04 lbs/in (x2)
AX30224 – Purple Springs 1.43 lbs/in (x2)
AX30225 – Orange Springs 1.75 lbs/in (x2)
AX30218 – Red Springs 2.07 lbs/in (x2)
AX30219 – White Springs 2.47 lbs/in (x2)
AX30220 – Green Springs 2.85 lbs/in (x2)
AX30221 – Yellow Springs 3.27 lbs/in (x2)
AX30222 – Blue Springs 3.55 lbs/in (x2)

Brandon’s Wraith – Now with Vanquish Currie Rock Jock Axles

The Vanquish fairy showed up last week and dropped these off on my desk.  My Wraith is finally getting some Currie goodness! My driver is very excited of course… Out with the old, they served me well. Thankfully BENDER already did a complete how-to blog post for the assembly of the new Vanquish Currie Rock Jock axles here: http://www.axialracing.com/blog_posts/1073903525 So I will go ahead and skip to the images of the assembled axles. The front of my Wraith, stripped and ready. Front axle installed.  My driver’s smile seems bigger? Rear axle installed. Finished! My driver’s smile just keeps growing. Thanks for looking!  My driver appreciates it.

Axial’s AS-3 Servo Upgrade

blog_servo_mod_500x220

Axial’s AS-3 servo is standard equipment in all RTR Axial vehicles. We know most people hear the term “RTR servo” and they immediately think an “upgrade” is in order. But, this servo is actually very capable for an RTR servo, especially when used in conjunction with 1.9 wheels and tires. The AS-3 servo is a digital servo, it has metal gears and is rated at 150 ounces of torque at 6.0 volts. The one drawback that this servo does have is the main output shaft is supported by a plastic bushing rather than a bearing. After you have run a few battery packs through your RTR you may notice a little slop in the servo’s output shaft where the servo horn attaches. Once dirt gets in around the output shaft and bushing, it starts to wear the bushing fairly quickly. As the bushing wears the servo output shaft will develop some side to side play. Once it wears to a certain point your gear mesh will be compromised and you run the risk of stripping teeth off a servo gear. Luckily for us Fast Eddy Bearings has recognized that a simple inexpensive bearing can add a lot of life to that RTR servo, and eliminate these problems. This is the best “bang for your buck” mod you can make to any Axial RTR vehicle. It is a simple, inexpensive way to upgrade your Axial AS-3 RTR servo.

Remove the servo horn from the servo’s output shaft. Then, remove the servo from the front axle. You will want to unplug the servo from the receiver, just to make the switch less of a hassle. A shot of the servo, and the new 6x10x2.5mm bearing that will replace the bushing.
servo-bearing-013

Using a 1.5mm driver, loosen up the 4 small screws on the bottom of the servo case.
servo-bearing-018

You can leave the screws in the case, just make sure they are all loose.
servo-bearing-019

Set the servo upright so it is sitting on the heads of the 4 screws. Push down on the case and the screws will pop the top cap off. Notice the white bushing on the servo’s output shaft. That is what we will be replacing. If you don’t see it around the output, check the cap of the servo case.
servo-bearing-024

Bushing removed.
servo-bearing-027

A side by side shot of the bearing and bushing.
servo-bearing-028

Install the new bearing in the top cap.
servo-bearing-042

Reinstall the servo’s top cap and you are done!
servo-bearing-047

Performing this simple mod will add a lot of life to your AS-3 servo. As mentioned earlier, this is one of the best mods you can make to your RTR Axial vehicle for durability reasons. If you have an old AS-3 servo laying around because it has some slop and you wanted to upgrade. Try installing one of these bearings, and you will have a decent metal gear servo for your spare parts bin.

Link to 6x10x2.5 bearing.
http://www.fasteddybearings.com/6x10x2-5-metal-shielded-bearing-mr106zz-w2-5/

Still not sure you have the confidence to perform this modification? Check out Team Fast Eddy’s video tutorial for a visual step by step “how to”!

Full Option RTR SCX10 Jeep

blog_fulloption_jeep

Axial offers several optional upgrade parts for the Jeep Wrangler Unlimited Rubicon RTR and Kit. Here’s a quick run down of what is installed and why you may want to use these items.

A couple photos of the completed full option build. Axial offers complete body kits for the Jeep, part number AX04035, that includes the clear Lexan body and all the scale accessories. We also offer just the replacement clear Jeep bodies as well, part number AX04033.

First option we will cover is Axial’s simple LED kit, part number AX24257. The simple LED kit comes with 4 white and 2 red LED lights to keep you running long after the sun goes down. I used two small light buckets from Axial’s Light Bucket Set, part number AX80045, and attached them to the front bumper mount with long M3 screws. I used Axial’s LED lens set, part number AX80049, to cover the LEDs front and rear for a more realistic look. The lens kit includes both clear and yellow lens covers to give users a couple options. Need even more light? Add our NVS system, part number AX24251, for the ultimate scale light system.

A couple shots of the rear LEDs with the clear lens covers in place.

Next option added was our new fully licensed Icon shocks, part number AX30103. These come standard in the Jeep kit, but are an option part for the RTR. These shocks feature a new and improved CNC machined shock piston for smoother action through the range of travel. The new Icon shocks also feature clear coated polished aluminum bodies, complete with aluminum faux reservoirs. The main body of the shock is threaded for quick ride height adjustments and pre-load tuning ability. Like their full size counterparts these shocks are completely rebuildable, tunable and offer consistent handling all while adding some of that Icon bling to your SCX10™ chassis.

Axial’s aluminum link kit, part number AX30550, for the SCX10™ was the next upgrade we added. Upgrade your stock plastic links to high quality aluminum. Aluminum links have less flex than the stock plastic links which helps your vehicle track straighter in all conditions. This link kit includes aluminum suspension and steering links, as well as all hardware and rod ends required to complete the conversion.

A shot of the steering links. If you just want to upgrade your steering links only Axial offers a steering upgrade kit, part number AX30426, as well. Upgrading your steering links to aluminum with improve steering response in all conditions, especially in hard binds associated with rock crawling. Another option part that can be seen here is Axial’s HD 25t aluminum servo horn, part number AX30836. Axial’s HD aluminum servo horn provides more responsive steering with less chance of stripping the internal splines over the stock plastic servo horn. Clamping style head for secure mounting in high stress applications. Available in 23, 24 and 25 tooth spline counts.

In this photo you can see a handful of upgrades to improve steering performance and increase the strength of the front axle. Aluminum knuckles, part number AX30496, aluminum knuckles help your vehicle track more consistently in all situations. Combine our knuckles with our aluminum C-hubs, part number AX30495, for the ultimate steering precision. Another option part installed here is Axial’s CVD’s, part number AX30464, for the SCX10™ axles. The CVD’s provide more steering throw that the stock dog bone set-up which is great for tight, technical trail runs. CVD’s also have less slop than the stock set-up for increased efficiency.

Moving on to the rear axle we installed our aluminum axle lockouts, part number AX30494. Axial’s aluminum axle lockouts are more rigid than the stock plastic lockouts, which will allow the vehicle to track better in all situations.

Axial’s HD motor plate was our next upgrade, part number AX30860. Our heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist! Axial also offers 13T, 14T and 15T steel pinion gears and an 80T spur gear to give end users an array of gear ratios to choose from. Add more torque for low speed crawling to your SCX10™ by installing Axial’s 55T motor. Or if more speed is your thing, add Axial’s 20T motor for higher top speeds. Another option part that we installed here is Axial’s dig system for the Wraith transmission, part number AX30793. This conversion also requires use of our Wraith Dig Transmission Case, part number AX80051. Axial’s dig system allows you to lock the rear wheels, while powering the front wheels only for a tighter turning radius. Shift servo sold separately.

Next option part installed is Axial’s black 1.9 beadlock wheels. Beadlock wheels allow users to tune foam set-ups and change tires at will for varying terrain and conditions. We also added our 1.9 internal weight rings, part number AX30547, for some added weight up front which will help us on steep vertical climbs. You can adjust how much weight is in the front wheels by using our 1.9 wheel weight inserts, part number AX30548.

For tires we went with our 1.9 Maxxis Trepador, part number AX12019. These tires are fully licensed by Maxxis and are molded in Axial’s sticky R35 compound for the ultimate traction in any conditions.

Complete SCX10™ option parts list:
AX8087 – 1.9 Black Eight Hole Beadlock Wheels (x3 to have spare tire)
AX8088 – 1.9 Chrome Eight Hole Beadlock Wheel (x3 to have spare tire)
AX08138 – 1.9 Black Walker Evans Wheels (x3 to have spare tire)
AX12019 – 1.9 Maxxis Trepador Tires R35 Compound (x3 to have spare tire)
AX12016 – 1.9 Ripsaw Tire R35 Compound (x3 to have spare tire)
AX30547 – 1.9 Internal Weight Rings (x2)
AX30548 – 1.9 Wheel Weight Inserts (x3)
AX30549 – SCX10™ Aluminum Link Set (11.4″ wheelbase – Dingo)
AX30550 – SCX10™ Aluminum Link Set (12.3″ wheelbase – Honcho and Jeep)
AX30426 – SCX10™ Aluminum Steering Kit
AX30464 – SCX10™ Universal Axle Set
AX30395 – HD Ring and Pinion Gear Sets (stock gear ratio) (x2)
AX30401 – Overdrive HD Ring and Pinion Gear Sets (x2)
AX30402 – Underdrive HD Ring and Pinion Gear Sets (x2)
AX30786 – Aluminum WB8 Driveshaft Retainer Rings (x2)
AX30571 – 13t Steel Pinion Gear
AX30569 – 14t Steel Pinion Gear
AX30573 – 15t Steel Pinion Gear
AX30665 – 80t Spur Gear
AX30860 – HD Motor Plate
AX30834 – 23t HD Servo Horn
AX30835 – 24t HD Servo Horn
AX30836 – 25t HD Servo Horn
AX30494 – Aluminum Axle Lockouts
AX30495 – Aluminum Axle C-hub’s
AX30496 – Aluminum Knuckles
AX30103 – Icon Aluminum Shocks (x2)
AX30132 – Machined Shock Piston 7mm – 1.5×3 (4pcs)
AX24260 – AE-3 Vanguard ESC
AX24010 – Vanguard 2900KV Brushless Motor
AX24007 – 55 Turn Motor
AX24003 – 20 Turn Motor
AX24256 – 5 LED Light String
AX24257 – Simple LED Kit
AX24251 – NVS Light System
AX80045 – Light Bucket Set (x2)
AX80049 – LED Lens Set – Yellow / Clear (4pcs)
AX30793 – Dig Component Set
AX80051 – Dig Transmission Case
AX04033 – Clear Jeep Wrangler Unlimited Rubicon Body (Body only)
AX04035 – Complete Jeep Wrangler Unlimited Rubicon Body Kit
AX30200 – Red Springs 3.6 lbs/in (short) (x2)
AX30201 – White Springs 4.32 lbs/in (short) (x2)
AX30202 – Green Springs 5.44 lbs/in (short) (x2)
AX30203 – Yellow Springs 6.53 lbs/in (short) (x2)
AX30204 – Blue Springs 7.95 lbs/in (short) (x2)
AX30205 – Red Springs 2.7 lbs/in (long) (x2)
AX30206 – White Springs 3.6 lbs/in (long) (x2)
AX30207 – Green Springs 4.08 lbs/in (long) (x2)
AX30208 – Yellow Springs 5.44 lbs/in (long) (x2)
AX30209 – Blue Springs 6.81 lbs/in (long) (x2)

Full Option RTR Poison Spyder Wraith

Axial offers several optional upgrade parts for the Poison Spyder Wraith RTR. Here’s a quick run down of what is installed and why you may want to use these items.

A couple shots of the fully optioned Poison Spyder Wraith RTR in the studio.

In this shot you can see you can see a handful of upgrades. The first upgrade is aluminum shocks, part number AX30092. Aluminum shocks provide better dampening than the stock plastic shocks, especially when mated with our polyoxymethylene – (POM/thermoplastic) shock pistons. The aluminum shock body and cap have less flex than plastic versions. Aluminum shock bodies also dissipate heat better than the stock plastic bodies. The shock shafts are oversized (3.5mm) for rigidity. They’re great for high power applications and long run times! We also offer a complete line of various springs to fine tune your suspension as needed – see the complete parts list below for more info.

Another parts upgrade is the front sway bar, part number AX30781. Designed for high speed this system will let you soften up your suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. A sway bar’s main function is to control body roll, yet still allow your shocks to move vertically with the changing terrain. What does all this mean? It means more stability at high speed. A must have upgrade for any would-be rock racer. Installing sway bars does limit articulation, so this is an option best suited for high speed applications. Great for use with our Vanguard brushless system, part number AX24010 and AX24260.

Moving on to the next part we installed a 25T aluminum servo horn, part number AX30836. Axial’s HD aluminum servo horn provides more responsive steering with less chance of stripping the internal splines over the stock plastic servo horn. Clamping style head for secure mounting in high stress applications. Available in 23, 24 and 25 tooth spline counts.

Axial’s next option part install is the Universal Light Bar, part number AX30709. Axial’s light bar is a great way to add realism and working lights to your Wraith with this universal light bar. Another option part that we plan to install is Axial’s NVS Light System, part number AX24251. The ultimate level in detail you can now add the NVS light system which features controls for headlights, tail lights, brake lights, and right / left turn signals, as well as some extra auxiliary lighting. Great for those night time expeditions. We also offer a 5 string LED light set, part number AX24256, to fit this light bar and it is compatible with Axial’s simple LED kit, part number AX24257, and our NVS System.

Another great upgrade is the Wraith Stage One link kit, part number AX30797. Add even more durability to your Wraith by upgrading your stock plastic RTR suspension links with our HD Stage 1 Aluminum Link Kit. Replaces all the stock plastic suspension links with high quality 7mm diameter aluminum links. These links eliminate axle wrap and unwanted axle steer, especially in high power applications. Axial also offers machined heavy duty aluminum straight links, part number AX30790, to replace the stock plastic lower links as an alternative the the Stage One link kit.

Axial’s HD motor plate, part number AX30860. Our heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist! Axial also offers 13T, 14T and 15T steel pinion gears and an 87T spur gear to give end users an array of gear ratios to choose from. Add more torque for low speed crawling to your Wraith by installing one of Axial’s optional brushed motors available in 27T and 55T configurations. Another option part that we installed here is Axial’s dig system for the Wraith transmission, part number AX30793. Axial’s dig system allows you to lock the rear wheels, while powering the front wheels only for a tighter turning radius. Shift servo sold separately.

Axial’s HD differential covers, part number AX30829. HD diff covers protect ring and pinion gears from being damaged by rocks, just like their 1:1 counterparts, all while adding a little bling to your ride.

Another option part that is usually hiding behind the HD cover is Axial’s HD ring and pinion gears, part number AX30395. HD ring and pinion gears are more efficient than the stock aluminum ring and pinions. CNC machined for precision, hardened steel for durability – great for high power applications. Axial also offers hardened steel overdrive ring and pinion gear sets, part number AX30401, for a little extra wheel speed. We also offer an underdrive ring and pinion gear set, part number AX30402, for a little more torque in binds.

Axial’s HD lower link mounts are another noteworthy upgrade, part number AX30830. Our HD lower link mounts allow users to fine tune ride height and wheelbase by providing more adjustment holes than the stock plastic units.

This shot also shows a few options parts. First option is aluminum knuckles, part number AX30760. Aluminum knuckles provide more responsive steering and helps vehicle track better at speeds and in the rocks. Another option shown is the Axial Aluminum C-hubs, part number AX30762. Aluminum C-hubs also help your vehicle track more consistently in all situations, especailly when used in conjunction with our aluminum knuckles. Also notice the AR60 universal axles, part number AX30780. Axial universal joint axles increase steering angle to 50 degrees, that’s 60% over the stock dogbone/drive cup setup. These universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; typical for 1/8 scale vehicles and made of hardened steel so it’s capable of handling extreme power.

Next option is the rear sway bar, part number AX30782. Designed for high speed this system will let you soften up your suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. A sway bar’s main function is to control body roll, yet still allow your shocks to move vertically with the changing terrain. What does all this mean? It means more stability at high speed. A must have upgrade for any would be rock racer. Installing sway bars does limit articulation, so this is an option best suited for high speed applications. Great for use with our Vanguard brushless system, part number AX24010 and AX24260.

Aluminum axle lockouts are another great upgrade, part number AX30789. Axial’s aluminum axle lockouts are more rigid than the stock plastic lockouts, which will allow the vehicle to track better in all situations.

We left the wheels and tires stock on this build. But, if you are looking to upgrade your wheels, we suggest our VWS beadlocks, part number AX08061. VWS wheels allow users to tune foam set-ups and change tires at will for varying terrain and conditions. Another wheel option offered by Axial is our black 8 hole beadlock wheels, part number AX8097. These wheels offer a little wider overall stance which equals stability at high speeds. For low speed rock crawling you can increase your Wraith’s climbing abilities by adding Axial’s 2.2 Internal Weight Rings, part number AX30545. Add even more weight by utilizing Axial’s 2.2 Internal Wheel Weights for the Internal Wheel Weight Rings, part number AX30546.

You can see our R35 Ripsaw tires pictured here on the full option RTR Wraith, part number AX12015. R35 Ripsaw tires offer both a realistic look for the image-conscious scale crawler and for those looking to up their performance game. This 2.2 Ripsaw offers an aggressive tread design, greater ground clearance, and is made from a R35 sticky compound. The VWS wheels include black aluminum rings, but I swapped those out for our Grey beadlock rings, part number AX08133, just to match the grey colored suspension links.

Complete Poison Spyder Wraith option parts list:
AX8097 – 2.2 Black 8 Hole Beadlock Wheels (x2)
AX08061 – 2.2 VWS Beadlock Wheels (x2)
AX08133 – Grey VWS Beadlock Rings (x2)
AX12015 – 2.2 R35 Ripsaw Tires (x2)
AX30545 – 2.2 Internal Wheel Weight Rings (x2)
AX30546 – 2.2 Wheel Weight Inserts (x2)
AX30797 – Stage One Link Kit
AX30790 – Machined Heavy Duty Aluminum Straight Link 101mm (x2)
AX30469 – Machined Heavy Duty Aluminum High Clearance Upper Links (x2)
AX80057 – XR10 Linkage Set (x4 for all 8 links)
AX30395 – HD Ring and Pinion Gear Sets (x2)
AX30401 – Overdrive HD Ring and Pinion Gear Sets (x2)
AX30402 – Underdrive HD Ring and Pinion Gear Sets (x2)
AX30571 – 13t Steel Pinion Gear
AX30569 – 14t Steel Pinion Gear
AX30573 – 15t Steel Pinion Gear
AX30672 – 87t Spur Gear
AX30829 – HD Differential Covers (x2)
AX30860 – HD Motor Plate
AX30830 – HD Link Mounts (x2)
AX30834 – 23t HD Servo Horn
AX30835 – 24t HD Servo Horn
AX30836 – 25t HD Servo Horn
AX30762 – Aluminum Axle C-hub’s
AX30760 – Aluminum Knuckles
AX30789 – Aluminum Axle Lockouts
AX30092 – Aluminum Shocks (x2)
AX30780 – AR60 Universal Axle Set
AX30781 – Front Sway Bar
AX30782 – Rear Sway Bar
AX30709 – Universal Light Bar
AX24256 – 5 LED Light String
AX24257 – Simple LED Kit
AX24251 – NVS Light System
AX24010 – Vanguard Brushless Motor
AX24260 – AE-3 Vanguard ESC
AX24007 – 55 Turn Motor
AX24004 – 27 Turn Motor
AX30793 – Dig Component Set
AX04027 – Wraith Clear Body Panel Kit
AX30223 – Black Springs 1.04 lbs/in (x2)
AX30224 – Purple Springs 1.43 lbs/in (x2)
AX30225 – Orange Springs 1.75 lbs/in (x2)
AX30218 – Red Springs 2.07 lbs/in (x2)
AX30219 – White Springs 2.47 lbs/in (x2)
AX30220 – Green Springs 2.85 lbs/in (x2)
AX30221 – Yellow Springs 3.27 lbs/in (x2)
AX30222 – Blue Springs 3.55 lbs/in (x2)

Full Option RTR Wraith

Axial offers several optional upgrade parts for the Wraith RTR and Kit. Here’s a quick run down of what is installed and why you may want to use these items.

A shot of the completed Wraith in the studio, Axial offers clear body panels for the Wraith, part number AX04027, to give your rock racer a custom look.

In this shot you can see a handful of upgrades. The first upgrade is aluminum shocks, part number AX30092. Aluminum shocks provide better dampening than the stock plastic shocks, especially when mated with our polyoxymethylene  – (POM/thermoplastic) shock pistons. The aluminum shock body and cap have less flex than plastic versions. Aluminum shock bodies also dissipate heat better than the stock plastic bodies. The shock shafts are oversized (3.5mm) for rigidity. They’re great for high power applications and long run times! We also offer a complete line of various springs to fine tune your suspension as needed – see the complete parts list below for more info.

Another parts upgrade is the front sway bar, part number AX30781. Designed for high speed this system will let you soften up your suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. A sway bar’s main function is to control body roll, yet still allow your shocks to move vertically with the changing terrain. What does all this mean? It means more stability at high speed. A must have upgrade for any would-be rock racer. Installing sway bars does limit articulation, so this is an option best suited for high speed applications. Great for use with our Vanguard brushless system, part number AX24010 and AX24260.

Moving on to the next part we installed a 25T aluminum servo horn, part number AX30836. Axial’s HD aluminum servo horn provides more responsive steering with less chance of stripping the internal splines over the stock plastic servo horn. Clamping style head for secure mounting in high stress applications. Available in 23, 24 and 25 tooth spline counts.

Axial’s next option part install is the Universal Light Bar, part number AX30709. Axial’s light bar is a great way to add realism and working lights to your Wraith with this universal light bar. Another option part that we plan to install is Axial’s NVS Light System, part number AX24251. The ultimate level in detail you can now add the NVS light system which features controls for headlights, tail lights, brake lights, and right / left turn signals, as well as some extra auxiliary lighting. Great for those night time expeditions. We also offer a 5 string LED light set, part number AX24256, to fit this light bar and it is compatible with Axial’s simple LED kit, part number AX24257, and our NVS System.

Another great upgrade is the Wraith Stage One link kit, part number AX30797. Add even more durability to your Wraith by upgrading your stock plastic RTR suspension links with our HD Stage 1 Aluminum Link Kit. Replaces all the stock plastic suspension links with high quality 7mm diameter aluminum links. These links eliminate axle wrap and unwanted axle steer, especially in high power applications. Axial also offers machined heavy duty aluminum straight links, part number AX30790, to replace the stock plastic lower links as an alternative the the Stage One link kit.

Axial’s HD motor plate, part number AX30860. Our heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist! Axial also offers 13T, 14T and 15T steel pinion gears and an 87T spur gear to give end users an array of gear ratios to choose from. Add more torque for low speed crawling to your Wraith by installing one of Axial’s optional brushed motors available in 27T and 55T configurations. Another option part that we installed here is Axial’s dig system for the Wraith transmission, part number AX30793. Axial’s dig system allows you to lock the rear wheels, while powering the front wheels only for a tighter turning radius. Shift servo sold separately.

Axial’s HD differential covers, part number AX30829. HD diff covers protect ring and pinion gears from being damaged by rocks, just like their 1:1 counterparts, all while adding a little bling to your ride.

Another option part that is usually hiding behind the HD cover is Axial’s HD ring and pinion gears, part number AX30395. HD ring and pinion gears are more efficient than the stock aluminum ring and pinions. CNC machined for precision, hardened steel for durability – great for high power applications. Axial also offers hardened steel overdrive ring and pinion gear sets, part number AX30401, for a little extra wheel speed. We also offer an underdrive ring and pinion gear set, part number AX30402, for a little more torque in binds.

Axial’s HD lower link mounts are another noteworthy upgrade, part number AX30830. Our HD lower link mounts allow users to fine tune ride height and wheelbase by providing more adjustment holes than the stock plastic units.

This shot also shows a few options parts. First option is aluminum knuckles, part number AX30760. Aluminum knuckles provide more responsive steering and helps vehicle track better at speeds and in the rocks. Another option shown is the Axial Aluminum C-hubs, part number AX30762. Aluminum C-hubs also help your vehicle track more consistently in all situations, especailly when used in conjunction with our aluminum knuckles. Also notice the AR60 universal axles, part number AX30780. Axial universal joint axles increase steering angle to 50 degrees, that’s 60% over the stock dogbone/drive cup setup. These universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; typical for 1/8 scale vehicles and made of hardened steel so it’s capable of handling extreme power.

Next option is the rear sway bar, part number AX30782. Designed for high speed this system will let you soften up your suspension for jumps, while keeping torque twist and body lean to a minimum during acceleration. A sway bar’s main function is to control body roll, yet still allow your shocks to move vertically with the changing terrain. What does all this mean? It means more stability at high speed. A must have upgrade for any would be rock racer. Installing sway bars does limit articulation, so this is an option best suited for high speed applications. Great for use with our Vanguard brushless system, part number AX24010 and AX24260.

Aluminum axle lockouts are another great upgrade, part number AX30789. Axial’s aluminum axle lockouts are more rigid than the stock plastic lockouts, which will allow the vehicle to track better in all situations.

For wheels, we went with our VWS beadlocks, part number AX08061. VWS wheels allow users to tune foam set-ups and change tires at will for varying terrain and conditions. Another wheel option offered by Axial is our black 8 hole beadlock wheels, part number AX8097. These wheels offer a little wider overall stance which equals stability at high speeds. For low speed rock crawling you can increase your Wraith’s climbing abilities by adding Axial’s 2.2 Internal Weight Rings, part number AX30545. Add even more weight by utilizing Axial’s 2.2 Internal Wheel Weights for the Internal Wheel Weight Rings, part number AX30546.

You can see our R35 Ripsaw tires pictured here, part number AX12015. R35 Ripsaw tires offer both a realistic look for the image-conscious scale crawler and for those looking to up their performance game. This 2.2 Ripsaw offers an aggressive tread design, greater ground clearance, and is made from a R35 sticky compound. The VWS wheels include black aluminum rings, but I swapped those out for our Grey beadlock rings, part number AX08133, just to match the grey colored suspension links.

Complete Wraith option parts list:
AX8097 – 2.2 Black 8 Hole Beadlock Wheels (x2)
AX08061 – 2.2 VWS Beadlock Wheels (x2)
AX08133 – Grey VWS Beadlock Rings (x2)
AX12015 – 2.2 R35 Ripsaw Tires (x2)
AX30545 – 2.2 Internal Wheel Weight Rings (x2)
AX30546 – 2.2 Wheel Weight Inserts (x2)
AX30797 – Stage One Link Kit
AX30790 – Machined Heavy Duty Aluminum Straight Link 101mm (x2)
AX30469 – Machined Heavy Duty Aluminum High Clearance Upper Links (x2)
AX80057 – XR10 Linkage Set (x4 for all 8 links)
AX30395 – HD Ring and Pinion Gear Sets (x2)
AX30401 – Overdrive HD Ring and Pinion Gear Sets (x2)
AX30402 – Underdrive HD Ring and Pinion Gear Sets (x2)
AX30571 – 13t Steel Pinion Gear
AX30569 – 14t Steel Pinion Gear
AX30573 – 15t Steel Pinion Gear
AX30672 – 87t Spur Gear
AX30829 – HD Differential Covers (x2)
AX30860 – HD Motor Plate
AX30830 – HD Link Mounts (x2)
AX30834 – 23t HD Servo Horn
AX30835 – 24t HD Servo Horn
AX30836 – 25t HD Servo Horn
AX30762 – Aluminum Axle C-hub’s
AX30760 – Aluminum Knuckles
AX30789 – Aluminum Axle Lockouts
AX30092 – Aluminum Shocks (x2)
AX30780 – AR60 Universal Axle Set
AX30781 – Front Sway Bar
AX30782 – Rear Sway Bar
AX30709 – Universal Light Bar
AX24256 – 5 LED Light String
AX24257 – Simple LED Kit
AX24251 – NVS Light System
AX24010 – Vanguard Brushless Motor
AX24260 – AE-3 Vanguard ESC
AX24007 – 55 Turn Motor
AX24004 – 27 Turn Motor
AX30793 – Dig Component Set
AX04027 – Wraith Clear Body Panel Kit
AX30223 – Black Springs 1.04 lbs/in (x2)
AX30224 – Purple Springs 1.43 lbs/in (x2)
AX30225 – Orange Springs 1.75 lbs/in (x2)
AX30218 – Red Springs 2.07 lbs/in (x2)
AX30219 – White Springs 2.47 lbs/in (x2)
AX30220 – Green Springs 2.85 lbs/in (x2)
AX30221 – Yellow Springs 3.27 lbs/in (x2)
AX30222 – Blue Springs 3.55 lbs/in (x2)

Battery Relocation – SCX10 Jeep RTR

We have been getting a few requests recently for a “step by step” tutorial on relocating the battery from its stock location in the rear on the SCX10-JK, to the front. This is a simple modification that can really transform how your rig performs in the rocks. Moving weight from the back to the front of a vehicle greatly enhances its ability to climb steep rock faces. This is a no brainer for me, as I am all about performance with my rigs regardless if they are scale or comp rigs. So let’s dig in!

I am using a “kit” SCX10-JK for this article, but the steps are exactly the same for the kit and RTR Jeeps. A couple shots of the battery tray in stock RTR form.

First thing we need to do is remove the two screws holding the metal battery tray to the chassis.

With the metal tray removed you can access the screws that hold the plastic base of the battery tray.

Remove the two screws that hold the base of the battery tray to the chassis cross-member, located between the rear shock towers.

Next remove the two screws that tie the radio box to the front chassis cross-member.

Locate the bag of plastic extras that is included with the RTR Jeep. Inside there are a few parts required to complete this modification.

Find two of the three battery tray posts in your bag of extras. These will be the main supports for the tray in its new location.

Now grab the parts tree numbered AX80009 from your bag of extras. Cut item #5 off the parts tree. We will use this spacer for the front of the battery tray.

The hardware required for the relocation.

The two main support screws should measure just over an inch.

The front screw needs to be shorter and should measure in the 5/8″ range.

Insert the two long screws in the holes closest to center of the plastic battery tray base, then slide the plastic battery tray posts over the screws.

While holding the spacers on the screws, set the battery base into place so the two long screws line up with the radio box holes. Tighten the screws down until they are snug.

Now grab your short front spacer and set it into place over the front frame cross-member’s molded boss.

Set the metal battery tray into place on the plastic base and install the shorter 5/8″ long screw through the front of the whole assembly.

Install the short flathead screw that holds the metal tray to the plastic base at the rear.

And you are done! A shot of the newly relocated battery tray.

Following these simple steps to move the battery will greatly improve on your SCX10′s already amazing capabilities. Time to go hit the trails!!

Axial – ICON Vehicle Dynamics 61-90mm Aluminum Shocks – Step by Step Build

AX30103 – Icon 61-90mm Aluminum Shock Set – 7mm piston (2pcs)

Now that we have released Axial’s newest scale shocks, which are officially licensed by Icon Vehicle Dynamics, I wanted to take some time to do a step by step build here on the blog to help people get the most out of their new shocks. These shocks are an improvement over our old SCX10 shocks, because of the new fully machined shock piston. The new piston provides a tighter fit inside the shock body which helps eliminate binds as the shock cycles through its travel. The new Icon shock bodies and reservoirs are clear anodized for durability and classic looks, which is a nice touch. Time to dig in and get our hands dirty!

A shot of the packaging. Each package contains all parts and hardware required to build two complete shocks.

I cut all the plastic parts I will need to get started off their respective parts trees.

Open the hardware bags and dump the contents out in a secure location so you don’t loose any vital parts.

Start by locating your aluminum shock bodies and the red o-rings. Apply a little grease to each o-ring before installing them into the shock bodies.

Once you have the o-ring lubed up drop it into place in the bottom of the shock body.

Now locate the plastic spacer that goes in between the o-rings, and install that on top of the first o-ring.

Grease the 2nd o-ring and install it into place on top of the plastic spacer in the shock body.

Next install the lower plastic cartridge and threaded preload adjuster onto the shock body.

Locate your shock shafts and e-clips next.

Install the first e-clip in the bottom slot on the shock shaft.

Slide the shock piston onto the shock shaft next.

Then, install the second e-clip to hold the piston in place.

Both shafts prepped and ready for the next step.

Now we can slide the shock shafts into the shock body from the top. Install the rubber bump stops and thread the rod ends into place as needed.

Apply the Icon decals to the shock reservoirs.

Using the supplied hardware, secure the shock reservoirs to the shock caps.

Insert the black o-rings into the shock cap, and make sure they are properly seated.

Now we will fill the shock body about 3/4 of the way with shock oil and cycle the shock piston to dissipate any and all air bubbles. Make sure the piston stays submersed in the oil while you cycle the shock to get rid of the air bubbles. Once the bubbles are gone fill the shock body until the oil is about 1/16th of an inch from the top of the shock body, so just shy of being full. Once the shock shaft is fully compressed, you should see the oil crown just above the top of the shock body. Screw the cap down tight while holding the shock shaft fully compressed. Once the cap is tight, wipe any excess oil away. Cycle the shock shaft a few times and listen for air bubbles. If you can hear air bubbles gurgling around inside the shock, start over and use a little more oil. Make sure all air bubbles are gone before re-assembling. If the shock shaft won’t compress all the way after this step, you have a little too much oil in the shock body. Remove the shock cap, and re-bleed the shock with a little less oil.

After you are finished bleeding the shock we can install the dual rate springs and spacers as needed.

Slide the springs over the shock body with the plastic spring retainer between the two springs.

Install the lower spring retainer next, and you are done!

That wraps up building Axial’s new fully licensed Icon shocks. Following these tips will help people get the most out of their new SCX10 shocks.

Project Wrexo – Body Off Photos

Most of you have seen a couple sneak peek photos of the latest project I have been working on dubbed “Project Wrexo.” Here are a few more teaser shots for you to check out. More details will be released on this project soon, as well as some video. So stay tuned to Axial’s blog for the latest!

Vanquish – Currie Rock Jock Axle Install – Wraith

As some of you may have seen, I recently wrote an article about swapping stock SCX10 housings out for the aluminum Currie Rock Jock axle housings from Vanquish Products. Vanquish has now taken these axle housings a step further by offering them for the Wraith as well. The assembly on these axles is very similar to the SCX10 version, which is fairly simple. The two biggest differences between the axles is the SCX10 ring and pinion assembly is centered on the axle, and the axle tubes are equal lengths. The Wraith version has the offset ring and pinion assembly with one short axle tube and one long.

I came back from lunch a few days ago to find that the “Vanquish Fairy” had left some parts on my desk for me. One quick look and I knew exactly what was in the package. Time to install some bling on my custom Wroncho build. Let’s get busy!

A shot of the front and rear axles.

I started with the rear axle, here you can see all the parts are sealed in separate bags to prevent damage during shipping.

Once you have your old axles torn down, grab the pinion gear and the two bearings used to support it.

Install a bearing on the pinion shaft and press it into the axle housing by hand.

Now set your ring gear assembly into place.

Use the supplied M3 hardware to secure the bearing caps that hold the ring gear assembly.

Time for the axle tubes. Here you can see the parts and tools required. A set of snap ring pliers are needed for this step.

Insert a 5x11mm bearing into the end of the axle tube, and install the snap ring to hold it in place.

Slide the axle shafts into place next.

Then install the drive pins and hexes.

Completed axle tubes ready for install.

Now insert the long axle tube into the axle housing opposite the ring gear.

Add a dab of blue thread lock to the M3 set screw.

Install the M3 set screw into the axle housing to locate the tube. Then do the same for the short side axle tube.

Now install the axle truss per the instructions to properly time the whole assembly.

Now install your four M3 set screws that secure the axle tubes to the center section. Don’t forget to add a dab of thread lock to these as well.

Now remove the axle truss so you can install the differential cover.

Add a little grease to the ring and pinion gears before installing the diff cover.

This is also a good time to fill the unused holes in the axle tubes with the provided set screws in the axle kit. Add a little thread lock to each one so they stay in place. Make sure you leave the holes needed to secure the axle truss empty as well.

Now install the diff cover using the supplied hardware.

Re-install the axle truss using thread lock per the instructions.

Install the link mounts.

Last but not least, install the differential skid plate.

Now we will move on to the front axle.

Dissect your front axle and set the parts you will reuse aside.

Grab the front axle’s center section and the rest of the parts required to complete this step.

Slide the pinion gear and bearings into the center section.

Drop the ring gear assembly in the housing and install the bearing caps with the supplied hardware.

Locate your axle tubes and the required set screws.

Insert the axle tubes into the housing’s center section and install the M3 set screws to locate the tubes.

Temporarily install the axle truss.

Add a little thread lock to the set screws used to tie the tubes to the center section.

Install the set screws to lock the axle tubes into place.

Remove the axle truss, grease the gears and install the differential cover.

Install the supplied set screws into the unused holes on the axle tubes.

Now you can used thread lock and install the axle truss permanently.

Bolt the link mounts into place on the axle.

Install the plastic skid plate on the axle’s center section.

Slide a 5x11mm bearing into the ends of the axle tubes.

I am using the Vanquish chassis mounted steering kit on this build, so I installed the 3 link mount on the axle tube at this time.

Install the inner axles, c-hubs, knuckles, steering tie rod and you are done.

That wraps up the Vanquish Rock Jock axle swap for the AR60 axles. For those that missed the SCX10 axle housing swap, here is a link to that article.
http://www.axialracing.com/blog_posts/1073902689