We left you hanging there in Part 3 didn’t we? We tell you not to modify the body and then tell you about a follow up blog on Body Mods. Well, here we are to show you a little can be done and some things to completely steer clear from doing. SORRCA in efforts to keep rigs on the trail in a recognizable scale form has determined performance gaining modifications like boat siding and sectioning bodies will not be permitted within the Class 1 rules. Here are some details to consider when preparing your Axial SCX10 or SCX10 II for a SORRCA event.
FOCUS 4: BODY MODS
SORRCA Rule • Boat sides are not allowed.
Ok Gilligan, you can’t modify your ship in order to run it ashore. Boat siding is a process in which the lower rocker panel and sometime door area is bent to an inward facing angle. This is done to help gain body ground clearance and also allow the body to glide over rocks and obstacles rather than possibly getting hung up. The angle of the modified panel simulates the angled hull of the boat which is how the name came about. All of Axial’s bodies from the 2000 Jeep® Cherokee, to the 2012 Jeep® Wrangler Unlimited Rubicon and even the new 2017 Jeep® Wrangler Unlimited CRC all have body sides perpendicular to the ground and fit within the rules. Resist the urge to tweak your Axial body with a pair of seaming pliers and you’re good to go.
SORRCA Rule • Any removal of material from behind the front wheel well (except trim/molding) is considered a boat side.
Put the scissors down and step away from the body. It is ok to trim your fender flares or molding from the body, but in doing so, make certain not to remove material from the fender on an angle greater than the removed flare. Simply altering the angle of the wheel-well opening is considered boat siding and can gain an advantage on the trail as well as take away from the scale look SORRCA is trying to maintain.
SORRCA Rule • Sectioning or narrowing of the body is not allowed.
Sectioning and narrowing a body, although more commonly practiced on ABS hardbodies because they are easier to glue back together is a way to reduce the chances of the body hanging up on rocks and obstacles. In this practice you are physically taking material away from the body in order to gain precious clearance that can help you gain an advantage. In doing so, you take away from the realistic scale appearance of a factory look.
GET SORRCA READY
If you are looking for every advantage possible during a SORRCA event, running factory Axial bodies with minor tweaks is an advantage. Consider the lightweight Lexan SCX10 II Jeep Cherokee XJ or Jeep Rubicon or Jeep Wrangler Unlimited with the flares removed. This will give you additional wheel clearance that could make a difference on the trails. On to Part 5; bed time…