Axial at Off Road EXPO 2014

blog_expo

Off Road EXPO at the Pamona Fairplex is an event that you must attend if you live in the So Cal area. This is the big off road show where you get to see all the latest and greatest off road equipment. We were on the scene checking out some of the awesome rigs on site and snapping photos of the Axial rigs we could find at the show.

This year was different for Axial as we had quite a lot going on. We had demos going in the Poison Spyder booth, the Icon Vehicle Dynamics booth, and the Yeti XL was attracting eyeballs in the BFG booth for its first public appearance.

Many of the Axial marketing partners were also on site showing off their latest goodies…. Check it out!

Icon Vehicle Dynamics just picked up a big rig to take their products and show on the road. This beautiful rig grabbed tons of attention. Those that ventured over to see them got to try their hand wheeling some SCX10s. You would have the option of running the Ram Power Wagon, the Honcho or the JK.

ORE 2014

ORE 2014

Have we mentioned we Love the ICON JK?

ORE 2014

and check out this awesome machine!!! I want this body for an SCX10!

ORE 2014

Camping anyone?

ORE 2014

Walker Evans Racing on site with this super clean JK!

ORE 2014

and of course Walker’s beautiful pre-runner buggy

ORE 2014

Rebel Off-Road always brings a crowd of people, and they should with their awesome selection of JK’s and other fun toys

ORE 2014

ORE 2014

ORE 2014

Does anyone else want 20 minutes alone in the desert with Method’s TT?

ORE 2014

Speaking of Method Wheels, check out this Shannon Campbell Replica Rock racer using Wraith and EXO parts that is almost completed. We found this in the Magnaflow booth

ORE 2014

ORE 2014

Also cruising around the Magnaflow booth was this little desert package, ready for the dirt this winter season!

ORE 2014

ORE 2014

They even had a Yeti on site!

ORE 2014

Our friends over at Rock Krawler made the trek from New York

ORE 2014

The Poison Spyder booth was a hit as always, completely jam packed with Jeep enthusiasts all day long!

ORE 2014

Crispy was out attracting people to the booth complete with a G6 mini Crispy

ORE 2014

ORE 2014

Still one of our favorite JKs

ORE 2014

The Demo at Poison Spyder was fun all around.

ORE 2014

ORE 2014

We stopped in to visit the Currie Family and check out their goodies. They had all their latest equipment on display along with their very high end Axial JKs

ORE 2014

ORE 2014

ORE 2014

ORE 2014

Only Casey Currie would do this……

ORE 2014

and then do this 20 mins later….

ORE 2014

The infamous Jerry from U4RC made an appearance

ORE 2014

The BFG booth had a steady flow of people all day, most to see the new KO2 tire, and a few to check out the Yeti XL!

ORE 2014

ORE 2014

BFG has an awesome 2 door, we want this one too….

ORE 2014

We bumped into sPOD in the main hall. They are using their SCX10 as part of their display system. So9 cool to hit the buttons on the sPOD, and the lights on the SCX10 light up!

ORE 2014

Our buddies at Nitro Gear getting ready for the crowds…

ORE 2014

Holy Billet Batman!

ORE 2014

Alex at AOE has been busy, his JK is looking ready for action!

ORE 2014

Here are a few parting shots for you, these kids have no idea how cool they are!

ORE 2014

ORE 2014

Oh and did you want any Jeep with your tires?

ORE 2014

Axial “SCX10JK” s-POD Source and Rigid Industries Lighting

We have been slowly working on finishing up some final touches to the SCX10JK. As we all know, the work is never really done on a trail rig, but it is cool to get to that point where everything is in good working order, and you have some time to do some stuff that has been on hold. In our case, it was time to look at turning night into day.

While doing an extensive amount of research about off road lighting, we found this company called Rigid Industries. These guys are at the forefront of the LED light bar movement. It appears as though many of the lighting companies are going the way of LED, and most looking at the low profile option of light bars instead of the traditional round lamp and reflector housings. At the front of this pack sits Rigid Industries, innovating and setting the benchmark. The light bars they have developed have paved the way for almost every off road light manufacturer. The Jeep JK has been the most popular vehicle to showcase this lighting option, so there are lots of options for Rigid lights and mounting systems.

null

null

Once again we headed over to Rebel Off Road to discuss these options for our JK. While discussing the options for the lighting the subject of power distribution arose. Rebel promptly recommended the s-POD Source.

null

The s-POD Source is a dream come true for those looking for the perfect way to power accessories without having to build a complicated wiring system or worry about having a negative effect on the factory wiring. Most new vehicles these days have a very sophisticated wiring system that is built for diagnostics. This means that almost every wire is monitored in the amount of current that passes through it. This means any extra demands of that wire over and above its intended purpose will throw a code warning the driver that there is a potential problem with the vehicle wiring system. The s-POD Source is designed to take power directly from the vehicle’s battery and distribute it to 6 potential aftermarket options. This was exactly what we needed!

null

We promptly ordered up the components to get the job done to include:
[1]s-POD Source
[1] Rigid Industries 50” E-Series Light Bar Combo
[1] Rigid Industries 10” E-Series Light Bar
[3] Rigid Industries Dually lights
[1] Poison Spyder Roof light bar mount
[1] Set Poison Spyder A-Pilar light mounts
[1] Fairlead mount for bumper light

Once the components arrived, we sent all the parts and the Jeep to Rebel Off Road to be outfitted. To start, Rebel mounted the s-POD and ran all the wiring, as well as mounted the mounting brackets for the lights
The Poison Spyder A-Pilar Mounts

null

The Poison Spyder front Fairlead mount

null

The s-POD comes with a direct fit mount for the Jeep JK vehicle.

null

You simply hook up the positive and negative included wiring, and you are ready to power whatever you want.

null

There is then 1 wiring harness that you run inside the vehicle to a vehicle specific switch panel. This panel for the Jeep JK is placed in between the sun visors, a perfect out of the way spot, yet easily reachable by the driver.

null

The next step was to run the wiring to the lamp locations. Here is a shot of the a-pilar wiring location. Notice the awesome waterproof plugs that are provided with the Rigid Industries Lights

null

With the wiring completed and the brackets in place, it was as simple as bolting the lights up and plugging them in!

The A-Pilar lights are small but offer a ton of light, as well as some quick side to side aiming options

null

The 10” E-Series light mounted on the front bumper is a great light to illuminate what is directly in front of the vehicle

null

null

The roof mounted Rigid Industries 50” E-Series lamp puts out massive amounts of light, and will be used to illuminate longer distances for higher speed night travel. This combo bar offers reflectors that also light up to the side of the vehicle for a wide range of viewing at night. It is mounted to a silver powder coated Poison Spyder LED bar mount.

null

null

We are very much looking forward to hitting the trail at night, now that we will be able to see! These things even blind you during the day time!!

null

For more information of these great products, please visit Rigid Industries here and s-POD here

To get the history on the Axial “SCX10JK”, please check out the following links! Be sure to check back often, as we will continue to build up the SCX10JK and fine tune it for maximum performance!

Axial “SCX10JK” Wilwood Brakes- Massive Stopping Power!

Axial “SCX10JK” tested – Moab, Utah for Easter Jeep Safari 2012

The Full Size Connection

Axial 2012 Jeep Wrangler Rubicon Unlimited

Axial Visits Rebel Off Road

Axial “SCX10JK” – Icon Suspension

Axial “SCX10JK” Armor – Poison Spyder Crusher Flares and Crusher Corners

Axial “SCX10JK” Armor – Poison Spyder Rocker Armor and Rocker Knockers

Axial “SCX10JK” Armor – Skid Plates from Rebel Off Road

Axial “SCX10JK” Walker Evans Wheels – Maxxis Tires – Rebel Roof Rack

Axial “SCX10JK” Armor – Poison Spyder Front and Rear Bumpers – TJM Winch

Axial “SCX10JK” tested – Moab, Utah for Easter Jeep Safari 2012

As we continue to build up our 2012 Jeep Rubicon we couldn’t help but notice the online buzz about Easter Jeep Safari in Moab, UT. The entire Rebel Off Road group were preparing their Jeeps for the event whilst putting time into our SCX10JK project. We decided that there was no better place to test our Jeep’s ability than to hit the world famous Moab rock trails. Moab has long been considered a Jeeper’s paradise, with roads that stretch hundreds of miles allowing people to enjoy some of the most beautiful scenery in the USA. Our “SCX10JK” wasn’t completely finished (is any rig ever really finished?), but we figured it was in a state of completion that would suit traveling the world famous Moab trails, hopefully without drama.

We requested some time from our internal graphics master Scott Roberts to whip up some art for the JK. He was extremely busy with Axial day to day operations, so we requested that he keep it simple and clean. We wanted to make sure our partners had a little exposure on the side of the Jeep as well as adding a little character to our rig. Scott whipped up some nice simple graphics for us and took the time to install them over at Rebel Off Road. Thank you Scott!

The first spot we hit was Hell’s Revenge. This particular trail is strange in that you drive your vehicle on a literal sea of rock. You simply follow the rubber marks from past travelers and negotiate a rollercoaster of winding trails. This place has a surface unlike anything I have ever seen. They call it slick rock, but the reality is… it is anything but slick. Instead it is like sandpaper and offers a tremendous amount of grip. It is possible to walk up near vertical faces in your plain old skate shoes!

There are some very cool breaks in the rock sea where there are winding sand trails

There are also a few ledges you must climb up

Bond from Rebel Off Road was our fearless leader on this run, he and his entire group of Jeepers are all awesome people to roll the trail with.

Bond’s Jeep

My ride for the trip was with Jason from Rebel, this Jeep is so awesome!!!

Here we are stopped for lunch!

To learn more about Hell’s revenge,click here

The next adventure we went on was on a trail called Metal Masher, this has to be one of the most beautiful places I have ever been! This trail winds up the side of a mountain and eventually takes you to a plateau overlooking Beautiful Moab, Ut.

Bond always makes the rounds to discuss what the trail has to offer and makes sure everyone is fully prepared for adventure, Thanks Bond!

Bond and his extremely well prepared JK always takes the bonus lines!

Some of the dry waterfalls and steps you get to drive up on this trail are absolutely amazing!!

This trail is loaded with optional more challenging lines; this was one of those advanced lines, amazing what these Jeeps are capable of!

Bond needed a little help getting over this one, so Jason stepped up to lend a hand :)

The Jeep experience is really cool. When the group reaches an obstacle, they all gather around and watch each other give it a shot. It is awesome to see so many people work together to make sure everyone enjoys their experience!

The terrain of this place is mind blowing!!

Rolling through beautiful Moab with a group of likeminded enthusiasts is surreal, as is the capabilities of this rig, JR… You have a sick Jeep my friend!!

Every time we would stop for an obstacle, the Axial RC rigs would come out and offer the youngsters a chance to get some of their own crawling done!

To learn more about Metal Masher click here.

We have successfully put the Axial “SCX10JK” through its paces, and as projected, it performed flawlessly! The combination of parts we selected to arm this JK for battle, were absolutely perfect! The body protection from Poison Spyder did its job, only experiencing minor scrapes, the wheel and tire combo from Walker Evans Racing and Maxxis offered tons of strength and traction, the Suspension system from Icon flexed when needed and offered excellent ride quality both on road and off road. The Spicer equipped drive shafts propelled us to incredible places, the crew at Rebel Off Road did a tremendous job preparing the JK and guiding us through some of the most incredible terrain on earth! You will have to wait to get a report on the TJM winch and recovery equipment, as of yet, we haven’t had to use it!

To get the history on the Axial “SCX10JK”, please check out the following links! Be sure to check back often, as we will continue to build up the SCX10JK and fine tune it for maximum performance!

The Full Size Connection

Axial 2012 Jeep Wrangler Rubicon Unlimited

Axial Visits Rebel Off Road

Axial “SCX10JK” – Icon Suspension

Axial “SCX10JK” Armor – Poison Spyder Crusher Flares and Crusher Corners

Axial “SCX10JK” Armor – Poison Spyder Rocker Armor and Rocker Knockers

Axial “SCX10JK” Armor – Skid Plates from Rebel Off Road

Axial “SCX10JK” Walker Evans Wheels – Maxxis Tires – Rebel Roof Rack

Axial “SCX10JK” Armor – Poison Spyder Front and Rear Bumpers – TJM Winch

Axial “SCX10JK” Armor – Poison Spyder Front and Rear Bumpers – TJM Winch

bumperblog-lead

We have been spending an awful lot of time over at Rebel Off Road lately, and who can blame us? All of us Axial RC guys look at this shop like our hobby shop. These guys are constantly working on cool projects. Lucky for us, the SCX10JK is at the top of their priority list. Jason over at Rebel gave us a call letting us know they were in the midst of installing the front and rear bumpers, so we had to roll over and check out the progress….

We selected the front Brawler Lite front bumper and skid found here

For those moments when Jeff finds himself in a pinch, he will call upon the assistance of a 10,000 lb. winch found here

We also selected the JK RockBrawler Rear bumper with tire carrier found here

First things first, we had to strip off the front and rear standard Jeep JK bumpers

Now that the bumpers are off it is time to start installing the Poison Spyder equipment. Rebel started with the front bumper and skid plate. Rebel sent the bumpers out to have them powder coated in a black to match the fenders and sliders.

Of course the team at Rebel installed the new “Stealth” series 10,000lb 7 HP winch from TJM. this winch is all new, and ready for extreme duty!

The final product is awesome! The Poison Spyder Brawler Lite bumper offers a significant improvement over stock allowing for an increase in approach angle, as well as leaving both front tires completely clear of any bumper, so those moments where a front tire must climb a vertical face there is nothing standing in the way!

The RockBrawler rear bumper and tire carrier was next on the Rebel priority list. This poison Spyder product, just like the other components were powder coated in a semi-gloss black before installation. The first portion of this process involves installing the main bumper blade. This is a relatively simple process and is completely bolt on.

The spindle of the swing out spare tire carrier is beefy. Beefy is actually an understatement, this think could hold and swing a tank without sagging :)

The carrier itself will hold a full size spare, and eventually a TJM hi-lift style jack.

The latching mechanism is genius, it shuts and locks like a car door, so there will be no accidental swinging open!

The spindle is covered by this awesome billet aluminum cap with the Poison Spyder logo on it, a little bling!

The rear bumper also has lights built in, these are wired to the reverse switch so when the Jeep is put in reverse they light up making backing up at night far easier

The portion that holds the spare tire is installed next

Finally the spare tire is bolted on

One last touch is the license plate mount, this puts the license plate in the middle of the spare tire

Of course the guys at Rebel always think of the small details, so they added an LED light for the license plate. This acts as a 3rd brake light in red, and also lights up the plate in white

The end result is a complete rear bumper and spare tire package that does not hinder departure angle whatsoever, offers plenty of protection and that signature Poison Spyder classy and clean look