How To: Install Beef Patties in Method Beadlock Wheels

Install Beef Patties

 

Running weights in the front wheels of your trail rig or rocker racer can have significant benefits such as a lower center of gravity and improved stability.  After searching through options that would work with my Altra 5K Bomber Build, I came across these Beef Patties made by the same company that made the Beef Tubes I used inside my axles on the Bomber Build. The Beef Patties add 4.5 ounces to the front.  These along with the Beef Tubes inside my axles increased axle weight by 6 ounces.  These are not made specifically for the Axial Method Beadlock wheels, but they can be installed with minimal modification.

IMG_20170602_162405

As you can see, the hubs don’t quite slide into the Beef Patties.  The hubs are just about 1mm too large in diameter, so a little sanding is necessary.

IMG_20170602_162448

I used some 60 grit. It made quick work of the job.  Just a few passes on each nub is enough.

IMG_20170602_162520

I stopped and checked clearance, almost there.  I just needed another pass on the sandpaper.

IMG_20170602_162713

Boom, slid in like a glove.IMG_20170602_163046

The Beef Patties fit perfectly in behind the wheels.

IMG_20170602_163040

Beef Tubes includes longer beefier hardware to mount them up. You can just see them poking out behind the spokes.

IMG_20170602_165304

Best part is they are a close match to the color of all the aluminum bling on my Altra 5K Bomber.  You know bling is important, because it adds 3hp per bling. I’ve already done a test run and am very happy with the improved crawling and handling.  Definitely a great, quick, and easy hop up to improve the stability of your RR10 or other rig.

More Information: Beef Patties