Scale Wheeling in Moab, Utah at EJS2014

blog_scalewheeling

Every spring Axial heads out to beautiful Moab, Utah for Easter Jeep Safari. This is one of the most beautiful places on earth to enjoy outdoor activities. If you are into Jeeping, RC adventure crawling, mountain biking, hiking, or just plain amazing scenery, then Moab should be atop your list of places to visit and enjoy. For the entire week preceding Easter Sunday, the who’s who in the 4×4 industry converge on this little town to share their latest off-road equipment, and their time with their clients and friends from within and outside of the community.

For Corporate Jeep, their week begins the weekend before, where they publicly unveil their Jeep concepts for the year. The “Underground” teams of engineers get to take their dreamt up creations, share them with the world’s press and test them in the ultimate mecca for 4wd enthusiasts. These are the vehicles that we all drool over, and wish we had a 1/10 scale body to mount on our SCX10. Even if we can’t have the bodies yet, we can still take inspiration from their creations. This year had some very cool vehicles, check them out here

In downtown Moab on Wednesday night, Axial builds the Jeep R/C adventure course. This event is put on by Jeep as a customer appreciation night for all the loyal Jeep fans. Part of the lot is set aside for the Axial crew to come in and build a fun demo course. All you have to do is wait in line and you get to try your hand at some scale Jeeping in Moab! This year’s course was a little simpler than previous years, though the man-made obstacles were very cool!

20140417_191141_resized

20140417_191125_resized_1

20140417_190756_resized_1

Just after the official Jeep BBQ event, the Axial staff heads off to the “Secret Spot” as it is affectionately called. There is really no secret about it, as it is located right off the main road on the way to steel bender. This spot, however, is absolutely perfect for some scale wheeling. This is the one time of the year that Axial gets a chance to spend some time with all their “Full size” marketing partners. So at about 9 pm, somewhere in the neighborhood of a half million dollars’ worth of Jeeps turn up for a little scale adventure crawl!

DSC00035

After a brief safety chat regarding the cliffs we were about to crawl next to, we fired up the Rigid duallys (powered by 3S lipos of course) and shot a quick group pic before hitting the trail…..

DSC00031

In all, there were 22 of us representing Axial, Poison Spyder, Currie Enterprises, Icon Vehicle Dynamics, Raceline Wheels, CRC, Pull Pal, Rigid Industries and Savvy Offroad. There is something about enjoying this hobby with this iconic group of guys that can’t be beat. This was probably the time of our lives, certainly when it came to our R/C Careers. We were amazed at how much transferred over from full size to scale. Some of the guys had never driven an R/C vehicle before and picked it up right away. We assume it helped having 20 of their closest friends there helping (Heckling).
Check out a few of the shots we were able to catch throughout the evening and during the rest of the week ….…

IMG_0629

IMG_0624

IMG_0606

IMG_0618

IMG_0611

The new Vanquish lights for the RC Jeeps are amazing!! These babies are stupid bright!

DSC00034

The guys at Poison Spyder put together an awesome little video of the nights action, check it out here!

We were able to get out and do a little full size wheeling with the guys from Icon Vehicle Dynamics. They were kind enough to allow the Axial Grocery getter to come along for a little Hell’s Revenge adventure..
IMG_0551

DSC_0013

IMG_0543

IMG_0565

IMG_0569

IMG_0564

Here is a cool test shot we did with Icon Vehicle dynamics

Axial Driver Jake Hallenbeck Rocks Utah Ultra4 race

blog_jake2014

blog_jake

Axial Driver Jake Hallenbeck Rocks Utah Ultra4 race

2014 American Rock Sports Challenge, Toole, UT

words and photos by: Mike Plunkett

DSC_3479

As usual , when Jake Hallenbeck of Marked Motorsports shows up to the track in the Axial sponsored
Bomber car. Everyone recognizes how well the car has been prepped just by the way it looks.
After the prep is all complete, Jake and his boys spend hours detailing the car for every event, and it
shows! ( I’ve even witnessed him washing it between heat races)

DSC_1604

Fridays Practice went smoothly. While most of the teams spent all their time trying to perfect times through their
favorite lines. Jake, I noticed, spent most of his time driving alternate lines in the event of a course pile-up.
Racing rarely comes without issues so planning ahead is sometimes key. (Great tactics if you ask me).

DSC_1215

Qualifying started out as expected until Jake had an axle break half way through the course slowing them considerably. He finished the coarse with a time of 2:07 minutes qualifying them 15th overall.

DSC_1175

With the days activities coming to a close the rain started coming down heavily. They were forced to make an axle swap in less than ideal conditions. The team was able to get the axle completed that evening so they could get rested and wait to find out where they would be placed for saturday’s prelims.

DSC_1456

It rained most of the night but by Saturday morning the sun was shinning. The nights rain made a muddy mess
of the track! It was some of the worst I have ever seen at an Ultra4 race! Luckily, Jake and the team found themselves in the 5th prelim of the day. This meant the mud had dried out only “slightly” making the track a little easier to navigate. And I do mean “slightly” as Jakes bomber is pictured. (Below) The mud was some of the worst i have ever seen at an ultra4 race. The race cars were unrecognizable to most.

DSC_2402

DSC_2386

Lining up 5th in the prelims would mean he would have to charge to the front to gain a better starting position
for the main event. As prelim 5 unfolded, traffic in the rocks worsened. They also found themselves battling a power issue from the motor that they thought was cured from the previous race! They sercombed and were able to finish 4th in their heat race guaranteeing them a spot in the main event. Not the starting position they were shooting for, but a spot in the main none the less.

DSC_2303

With a few hours to the main event the team decided to clean up the mud acquired during the race. They also dug into the car once again in search of their power loss issue. Checking codes, temperatures of each cylinders, wiring, fuel pumps, and anything else they could have missed.

Based on their prelim times the line up was set for the main event. Jake and Co-dog Bernie found themselves to be starting 10th off the line. He knew he needed to be closer to the front to be within striking distance of those over powered IFS cars and have a chance at a podium finish.

As the main race began things started out as expected. Those IFS cars took off in a blistering pace, forcing Jake to push the car that much harder. Running a fast, yet consistent race was keeping him in the hunt, but at this pace he also found the cars power issues were still there and it was running hot at over 250 degrees!

I have been photographing and watching Jake since he started Ultra4 just a little over a year ago. Jake is known for waiting for drivers ahead to make mistakes and then pouncing. Could he hold out long enough and wait for those powerhouses to make a mistake? The mistakes were beginning to unfold but without the engine power, and what appeared to be some slower lap times, I wasnt sure if it was going to happen this time.

All of a sudden he began to run the buggy hard! It was time to pounce and see where the cards stacked. I scrambled to run around the track and get photos and thats when things got rather confusing! One leader rolled, another lost his lead and was forced to run on a flat front tire, teams were being slowed for recovery vehicles, and in general, I don’t think anyone knew what position they were in anymore!

DSC_3556

When the checkered flag was thrown, we all knew Loren Healy had won but we were being told Jake was running in 2nd or 3rd? By the time I arrived at the podium officials had spent several minutes of checking the electronic transponders and sorting things out. Dave Cole of Ultra4 announced Jake finished 4th behind Loren Healy, Jason Scherer, and Erik Miller in that order.

DSC_3603

Considering the issues they had and a couple hundred horsepower shy of what the leaders were running, it ended up being a pretty good weekend for the Axial sponsored team! Im proud of Jake and his Marked Motorsports team for staying smooth and consistent as he does so well. Jake, you can run with most anyone! Good job you guys…

DSC_3861

Jeeping with Casey Currie at EJS2014

blog_jeepingcasey

Casey Currie is an absolute Jeep fanatic. Anyone who follows Casey can see this plain as day, though until you spend a few days with him, you can’t truly know how bad he has it. All hours of the night, in the worst weather conditions, regardless of what is going on or what time it is, Casey is ready to go wheeling. At this years’ EJS, we jumped in the Axial grocery getter, soccer mom mall crawler, whatever you want to call it, and headed out to meet with Casey. He said he had both of his JKs and he was ready to have some Moab fun.

DSC_0022

DSC_0036

DSC_0038

Upon arrival, we see that Casey wasted no time modifying both of his Jeeps. His full size rig was all decked out. We also noticed his Scale JK was equipped with Vanquish Currie Rock Jock axles, Vanquish Rigid Industries light bar, Vanquish front dig, RC4WD Warn Winch. He chose the 55t Axial motor running on 3s for smooth crawling. Once we arrived on Hell’s revenge, he immediately jumped out of his full size JK and started attacking the rock with his SCX10.

DSC_0074

Casey always immediately goes for the “Man’s Line”

DSC_0062

DSC_0067

We just had to get some video to share with you, check it out!

Axial R/C to support Inaugural Silver State 4wd & UTV Jamboree

blog_silverstate

FOR IMMEDIATE RELEASE:
Axial R/C to support Inaugural Silver State 4wd & UTV Jamboree

Axial R/C Inc., A subsidiary of Hobbico Inc., is proud to announce a marketing partnership with Carrera Performance Group LLc. The Axial R/C team will be headed to Reno, Nevada for the week of July 14th through July 18th attending the inaugural Silver State 4wd & UTV Jamboree for a week full of adventure!
The Silver State 4wd & UTV Jamboree (SSJambo) is a first year event catering to everything adventure and off road. Located in Northern Nevada, this event is packed full of reasons to spend a week exploring and enjoying the outdoors with friends.

The week kicks off on Monday July 14th with an Off Road Business Association (ORBA) OHV leadership summit. This is where some of the most influential minds get together to shape the future of the off highway community. This is also one of the most active groups fighting to keep public lands open for off highway recreation.

Tuesday July 15th starts with the Genright Tour to Virginia city for sightseeing to include the Comstock, the first major Silver Ore discovery in the United states. The day will end with the RallyVenture welcome party.

Wednesday July 16th marks the start of the RallyVenture. The RallyVenture is just like a RECON G6 for full size rigs. Axial is one of the 25 teams invited to participate in this invite only inaugural event. The full size SCX10JK will be piloted by Axial staff as they attempt to make history in Nevada!

Thursday July 17th will have Axial on the move again following our trusty partners at Poison Spyder Customs to Virginia City to explore the oldest Silver mining town in Nevada. The “Bucket of Blood” Saloon will be one of the highlights, known for its violence back when the mining town was running at full steam.

Friday July 18th will be qualifying day for the Hellsgate Grand Prix, an Unlimited 4wd Racing event to be held at Wild West Motorsports park. It will also be the day Axial and CKRC set up a booth for Saturdays racing action.

Saturday July 19th Axcial and CKRC will be on site with a booth showing off Axial R/C vehicles to the masses that arrive to spectate the inaugural Hellsgate Grand Prix. The Hellsgate Grand Prix will provide a ton of entertainment all day long with sidexside racing, Unlimited 4wd racing and the Deathbox derby.

For all the details on this inaugural event, please visit www.silverstatejamboree.com

About Carrera Performance Group LLc.

Off-Road History: Jeff became an “off-roader” in 1975 with his first dirt bike, a Honda Mini Trail 50. His parents were members of an off-road club called the “Looney Duners” in the 70s and 80s and many of his childhood weekends were spent out at Glamis, where his step-mother’s father had a business called “Boardmanville Trading Post”. Growing up in Menifee, California afforded Jeff the opportunity to do a lot of motorcycle riding. He met his wife, Angie, in high school and after graduation, they began riding trails and camping around Southern California. They raised both of their children in the back of Jeeps and Angie recalls changing many a diaper in the front seat of one. They have owned Jeeps and other off-road vehicles continuously throughout their 22 year marriage and have founded several off-road clubs including the Safari Club, Riverside Off-Kamber Club and Inland Jeep Freeks.

Racing: Jeff began racing BMX bikes at the age of 10. He has raced under many sanctioning bodies in several different classes. He has raced Best in the Desert, MORE, SCORE, and MDR series’. He has raced Jeepspeed, class 3000 and class 4400. He has written rules for BITD class 3000 and 4400, as well as rules for Side x Side racing under the International Side x Side Association (ISA). He has created two different sanctioning bodies for racing, the California Rock Crawlers Association (CRCA) and Ultra4 Racing. He is co-founder of the world famous “King of the Hammers” race held in Johnson Valley, CA each February.

Jeff has also developed and published strategic plans for the Off-Road Business Association and the California Motorized Recreation Council on Johnson Valley. In addition, he is a regular contributor to OffRoadPress.com and SEMA E-news. He contributes freelance for Crawl Magazine, DirtSports Magazine, Pirate4x4.com and Off-Road Industry Magazine. In 2013 Jeff Knoll published a whitepaper called “Common Ground” that became the basis for Legislation that passed the House of Representatives and as of this writing is being debated in the Senate. The bill would establish the first of its kind Congressional protected OHV area, and save the largest OHV area in the United States

About Axial

History
Founded in 2005, Axial R/C, Inc. has quickly become a global brand leader of hobby grade radio controlled products. We manufacture chassis and accessory products to the highest quality standards, with design emphasis on rugged construction and scale realism. Axial is regularly involved in local and national events which allow us to keep our finger on the pulse of R/C culture, thus earning us many awards over time, including “Best Truck”, “Most Innovative”, “Best Engineered Product of the Year”, and “People’s Choice.” Axial and the talented staff behind the brand live and breathe R/C, striving for excellence year after year.

MISSION
Axial is a company of enthusiasts for enthusiasts. The passion for the automobile runs deep within the Axial team. The brand itself is a culmination of a top shelf design team coupled with an executive and marketing staff with their finger on the pulse of what is hot and trending in the world of motorsports. Here at Axial we pride ourselves on developing extremely high end radio control models of vehicles that you are likely to see in the great outdoors. These models are designed to generate a tremendous amount of reliable fun that can be experienced by the whole family. Our design team prides themselves on marrying real scale looks with top level performance. Our marketing team ensures Axial is on the forefront by developing partnerships with top quality brands of the full size enthusiast market. Whether you are a beginner looking to further your knowledge about basic vehicle dynamics or a seasoned hobby veteran, Axial offers a platform for you to personalize and enjoy in every environment. The Axial team encourages you to get outside and have some family fun.

AXIALFEST 2014: Pre-Registration Closing 5.26.14

blog_closing_500_220

PRE-REG BY MAY 26th. You have Monday off for Memorial Day, take a minute and make sure you get your PRE-REGISTRATION DONE!!!!

MAY 26th IS THE LAST DAY TO REGISTER!!!!

What you get for PRE-REG:
Name printed on Event Pass or it will get hand written on site at the event.
Event T-Shirt –  it will cost $15 on site at the event.
AXIALFEST 2014 Embroidered Patch with Hook and Loop backing – it will cost $5 at the event.
Limited Edition Axial Embroidered Hat –  it will cost $35 on site at the event.

IMG_8713

IMG_8706

axialfest_2014_shirt_sample

YOU GET A $55 VALUE-ADD BY PRE-REGISTERING FOR AXIALFEST

RECON G6 – Birthday Bash 3

blog_g6birthday

RECON G6 Presents
Birthday Bash 3
Wingfield Park, Reno, Nevada
December 7, 2013

It’s still hard to believe the RECON G6 is three years old. It seems both older and newer at the same time. On one hand, it seems like just yesterday that I drove in the first RECON G6 at Mayberry Park, and yet it also feels like I have been doing this all my life. I think the camaraderie and family like atmosphere just makes the RECON G6 feel like home.

In celebration of the success of the RECON G6, the Birthday Bash has always been a thank you from RECON G6 to all the drivers that make the RECON G6 what it is. This past year the RECON G6 went nationwide and international with events in Florida, Missouri, Colorado, Arkansas, Oregon, California, Nevada, and Ontario, Canada.

The RECON G6 Birthday Bash has also partnered with a couple local charities, so drivers were encouraged to bring toys for children as well as nonperishable food items for the local Sheriff’s Christmas on the Corridor toy drive and Evelyn Mount Community Outreach food pantry.

In the past, Mother Nature has been kind to the RECON G6ers with mild winter weather. This year Mother Nature had a special treat for the G6ers, snow and freezing temperatures. I was a bit worried. I wasn’t worried about fun because this would not be the first snow covered G6. There was a RECON G6 a couple years ago that the RECON G6 crew shoveled miles of snow paths for. So, I knew that the RECON G6 crew would have a path cleared for the drivers. What I was worried about was attendance.  I was afraid the snow roads and frigid temperatures would render the turnout low. I’m not sure why I was worried. G6ers are a special breed. There were already many cars in the parking lot. I spotted some out-of-towners who braved the roads to attend.

DSCF0398

This guy made the trip down from Oregon. He was the first one I spotted as I parked.

DSCF0400

There’s a California. Looks like he saw quite a bit of snow on the pass over.

DSCF0403

Idaho, too. This family came overland ready.

DSCF0401

I also spotted Old Red Rocket in the parking lot. I wonder what time she got there?

DSCF0405

The Truckee River looked a little frigid. I wouldn’t want to fall in there today.

DSCF0439

When I turned the corner, I was a little surprised to see how many G6ers were already registered and lined up. They had their kits decorated in the Birthday Bash spirit.

DSCF0409

Presents, check. Christmas Tree, check.

DSCF0410

Someone went crazy with the pipe cleaners and foamy stickers.

DSCF0414

I little ribbon can really dress up your JK in a hurry. All it takes is a little imagination.

DSCF0411

I spotted my first RECON G6 Jeep Wrangler in the wild. This one was fitted with snow chains. These G6ers were ready for the snow.

DSCF0415

This sweet Pajero has a G6 certified sticker on the bumper, but I think it is a mall crawler. I never saw it get dirty.

DSCF0418

Why is this guy smiling like this?

DSCF0419

DSCF0545

Because the RECON G6 crew set up a warming tent with a huge mushroom heater in the middle. This was a popular spot to come warm up and trade driving stories.

DSCF0434

Adventure IQ brought up his family. They shared their cookies, heater, and best of all….

DSCF0422

…the most delicious, soul warming spiced apple cider I have ever tasted. It was AWESOME.

DSCF0425

Look who made the 5,000 mile trek from Austria for the FOURTH TIME, Daniel Siegl. What’s your excuse for not attending a RECON G6 event?

DSCF0440

Jesse registers while trying to work around all the toys and food all the G6ers donated.

DSCF0424

I see canned food and a snow saucer, the perfect present for the day.

DSCF0426

A whole family of Happy Birthday Heads.

DSCF0427

Not a thief, just trying to keep the face from freezing.

DSCF0429

The coolest RECON G6 Jeep Wrangler I saw from KlingOn RC. This thing was sweet looking.

DSCF0433

Even his interior was dialed.

DSCF0435

New for 2014 is the Expedition Class. Trailers and 6x6es finally get their own class. This guys was a little eager to get it started.

DSCF0444

That’s more kits than I expected to see on a 7* winter day.

DSCF0451

The trail looked ready. Drivers were just waiting for the Parker to arrive.

DSCF0446

There he is. Listen up drivers. This is a special RECON G6, there are…..

DSCF0449

I hope they listened to instructions. I headed out to set up for photos.

DSCF0454

Mandatory National Anthem.

DSCF0456

Now we’re off. I wonder how those chains will work.

DSCF0457

Pretty good, so far.

DSCF0459

The walking warms the body.

DSCF0461

The first section was down some snow covered boulders.

DSCF0463

Good to see the Ridgeline getting some wheel time.

DSCF0464

Snow makes for some slow driving, so lines were pretty common on the first lap.

DSCF0465

DSCF0467

Those leaves will either create traction or remove traction, only time will tell.

DSCF0468

I loved this Bronco.

DSCF0470

I hope those presents don’t fall off the back. He should put those in the cab.

DSCF0471

Looks like those leaves remove traction.

DSCF0473

The Great Pham coming through in the second wave.

DSCF0475

Watch out for trolls under the bridge.

DSCF0477

I spot the Daniel Siegl out there.

DSCF0478

These ducks heard a commotion and went to investigate.

DSCF0479

It was the G-Train coming through.

DSCF0480

Down the Urban Highway.

DSCF0483

Over to the movie theater. A patron asked what was happening. They wondered why all these people were out walking their radio controlled cars.  I gladly explained the RECON G6 to them.

DSCF0485

These steps were easier to go down than up.

DSCF0487

This poor sport was pouting because his parents didn’t buy him the RECON G6 Jeep Wrangler for Christmas.

DSCF0489

Approaching Flop Corner.

DSCF0491

Why is it called Flop Corner?

DSCF0492

Oh, that’s why.

DSCF0493

Good thing G6ers are helpful and quick to lend a strap.

DSCF0497

DSCF0499

DSCF0502

Another RECON G6 Jeep Wrangler making things look easy.

DSCF0507

It had to strap this poor Cherokee through TM20.

DSCF0510

Snow required large doses of skinny pedal at times.

DSCF0514

DSCF0516

KlingOn RC RECON G6 Jeep Wrangler flexing its muscles.

DSCF0519

Nice hat, Tim.

DSCF0522

Wraiths had to be a little more cautious on this ledge.

DSCF0527

You needed a little speed to make it up this rock face. This Wraith had plenty.

DSCF0532

This mud truck turned into a snow truck.

DSCF0534

Well, that’s one way to get the snow of your kit.

New Awards: Drivin Durty, drivers that don’t have licenses. AKA under 15 class

DSCF0535

DSCF0536

Drivin Divas, The Lady Class.

DSCF0537

DSCF0538

OG Drivers of the Day.

DSCF0539

DSCF0540

Of the Year Awards.  Drivers who Shined All Year Long by exhibiting the Spirit of the RECON G6.

DSCF0542

DSCF0543

DSCF0544

The BIG Winner.

DSCF0550

The other winners.

DSCF0547

Thanks again Axial and the RECON G6 crew for a great year. I know that 2014 will be even more spectacular. Check www.recong6.com for the full list of events in 2014.

2014 King Of The Hammers has Great Results for Currie Racing

Currie_020_webc0c866.1a

Johnson Valley, CA. 2-10-14 – Casey Currie returned for the 2014 Griffin King of the Hammers this past weekend, expectations for a win may not have been met, but the odds of finishing the race were on Curries side. The week long event took place in Johnson Valley, CA where over 40,000 off-road/rock crawling enthusiasts flocked to watch 158 entries take their chance at the 150 mile brutal course.

After Curries 3rd place finish in Wednesdays UTV race, he helped his uncle, John Currie prepare for Thursdays Every Man Challenge. John qualified 1st for the race. Just miles into the start of the race, John gained a significant lead on the other competitors and continued to hold that lead all the way to the finish.

“We make sure that racing is fun for our entire family and it was great to see my Uncle as well as my brother finish on the podium.” Stated Casey Currie. “Knowing that my uncle won the EMC in the same vehicle I raced on Friday solidified my concerns on being a top competitor for the King of the Hammers race.”

Casey qualified the #88 Ultra 4 truck in the 44th starting position. The race began at 8am sharp and once on the course, Currie set a steady pace for the first lap. The first lap of the race consisted of dry lake-beds, sand washes and dunes. Currie finished the lap with no major issues and came into the main pit physically in the 20th position.

Laps 2 and 3 were more demanding and difficult with the course making its way through Clawhammer, Wrecking Ball, Chocolate Thunder and more. These laps would take there toll on numerous Ultra 4’s. Some out of the race, others rolled over and giving it all they have to get back on all fours. Currie and co-rider, Oren managed to make the right decision when making their way up the waterfalls.

“It is important to have a co-rider with you that is smart, calm and can assess the situation. This is just what Oren does.” Said Currie.
Currie_006_web.1a

As Currie made his way up “Backdoor” one of the hardest obstacles of the course, Oren had the challenge of guiding Currie up the slippery rocks. Other stuck vehicles would block the best lines and another vehicle would roll on its lid right next to them. This would be the only part of the course that would set the team back on time, but it wasn’t long before they made their way to the top and continued towards the finish.

In ten hours and 50 minutes, Currie and Oren crossed the finish line. Once at the finish the celebration was well deserved as the team got the results of a 14th place finish. This was worth celebrating since the #88 Ultra 4 was the first vehicle to come in that had only 14inches of travel, where as all the other finished had 20inches.

“We couldn’t be happier with our finish. It was a long day out there and the course was rough. The ruts were huge and dealing with other stuck competitors was a challenge. There is always the chance that they can take you out as well. Finishing in the top 15 out 158 speaks volumes of our team and the vehicle. Big thanks to everyone who puts this race together and on a great week of racing.” Stated Currie.

Be sure to follow Casey on all his social media outlets:
Twitter
https://twitter.com/CaseyCurrie

Instagram
http://instagram.com/caseycurrie

Facebook
https://www.facebook.com/OfficialCaseyCurrie

Axial – The Official R/C vehicles of Ultra4 Racing – King of the Hammers 2014

blog_axial_koh2014

FOR IMMEDIATE RELEASE:
(Irvine, CA) January 10, 2014.

Axial R/C Inc., A subsidiary of Hobbico Inc., is proud to announce Axial as the Official R/C Vehicles of Ultra4 / King of the Hammers for 2014.

Ultra4 Racing is the latest and greatest off road motorsport event on earth. This style of racing challenges man to a duel with the elements. Unlike standard off road racing in a stadium or in the wide open desert, Ultra4 vehicles face challenges that no other motorsport demands. Competitors are not only made to cross vast areas of open desert, they also travel up boulder strewn canyons and negotiate terrain that appears impassable. To compete in such a demanding environment, competitors build custom four wheel drive vehicles that are made to crawl over the harshest terrain, then conquer the wide open desert at exhilarating triple digit speeds. This element of automotive enthusiasm is precisely what Axial R/C has set out to deliver in 1:10 scale, so the relationship between Axial R/C and Ultra4 is a very natural fit.

Axial’s roots are directly tied to motorsports, especially competitive rock crawling. As full size competitive rock crawling transcended into what is now rock racing, the sport became globally recognized in a short five years, most notably the King of the Hammers [KOH] held annually in Johnson Valley, California. Axial followed suite with its own version of vehicles that translated well within this segment of the off road community. Axial has been very offroad lifestyle driven and fits perfectly with Ultra4 and the King of the Hammers event which is the mecca of enthusiasts pushing the boundaries of rock racing. Axial will be on site at the 2014 King of the Hammers offering enthusiasts an opportunity to experience the endless fun that these rock racing and trail navigating R/Cs have to offer.

On the Saturday following KOH [Feb 8th], there will be a radio controlled version of King of the Hammers as Axial hosts the RECON Ultra4 G6 at King of the Hammers.

Axial RECON Ultra4 G6 at King of the Hammers
When: Feb. 8 – 12:00 Noon
Where: (GPS- N34 24.927, W116 31.090) just west of Hammer Town at the base of the mountain.

R/C motorsports joins full size motorsports once again as Axial joins forces with Ultra4 / King of the Hammers. 2014 will once again see Axial bring the RECON G6 Series along for the full experience. Axial has teamed with full size motorsports in the past and is doing it again in Johnson Valley, Ca. ,on Saturday Feb. 8th, the day after the King of the Hammers main event. This is the last event on the 2014 KOH schedule starting at noon on Saturday, if you own an Axial R/C, come out and get your fix in this historic RECON Ultra4 G6. The RECON G6 series is made up of R/C endurance events featuring man and scale machine tackling the elements, a true test for your R/C vehicle with a major emphasis on a family fun atmosphere. The object is to conquer the course set forth by RECON G6 mastermind Brian Parker. For more information on this event, please click here.

About Axial
Founded in 2005, Axial R/C, Inc. has quickly became a global brand leader of hobby grade radio controlled products as Axial is a company of enthusiasts for enthusiasts. We manufacture chassis and accessory products predominantly for the Rock Crawling and Overland Adventure segments, with design emphasis on rugged construction and scale realism. Axial is regularly involved in local and national events which allow us to keep our finger on the pulse of R/C culture, thus earning us awards every year from 2007 through 2010, including “Best Truck”, “Most Innovative”, “Best Engineered Product of the Year”, and “People’s Choice.” For more information on Axial and Axial products please visit www.axialracing.comtwitter.com/axialracingfacebook.com/axialincyoutube.com/axialvideos

About Ultra4
Ultra4 Racing is the official website of Hammerking Productions. The founders of Hammerking are the force behind the toughest one-day off-road race on the planet: King of The Hammers. King of the Hammers takes place each year in February, on public lands in Johnson Valley, CA. The race has evolved from 12 teams racing for bragging rights and a case of beer, to more than 150 teams competing before thousands of fans both live and online. Due to the incredible success of King of the Hammers, Hammerking has created an equally difficult off-road endurance race called The Stampede which occurs annually in Reno, NV.

In addition to these races, Hammerking has established a racing class known as the Ultra4 class. The defining characteristic of this class is that all cars must be capable of 4-wheel drive. Beyond that, the class is unlimited, which means these cars come in all shapes and sizes and are capable of speeds over 100+ MPH and still contain gear ratios as low as 100 to 1 for technical rock crawling.

To give these cars and their drivers a chance to showcase their unique capabilities, Hammerking has formed the Ultra4 Racing series. The series challenges drivers to compete in a wide variety of terrain from endurance desert racing to competition-style rock crawls to short course racing. Hammerking currently produces five of the six races in the series on their own. The races take place on both public lands and in private motorsports parks across the country including: Exit 28 Motorsports Park in Nevada, Rausch Creek in Pennsylvania and Miller Motorsports Park in Utah.

Hammerking Productions has also produced three full-length feature films chronicling the first three King of the Hammers races. These award winning movies have helped shine a spotlight on this new form of racing throughout the world. Currently, fans are eagerly awaiting the release of Hammerking’s fourth production which will be coming to theaters and DVD by mid 2011.

If you would like to know more about Hammerking, Ultra4, the races produced and/or the movies created, please visit www.ultra4racing.comtwitter.com/Ultra4racingfacebook.com/Ultra4Racingyoutube.com/HeavyMetalConcepts

Contact:

Scott G.
Marketing – Special Projects
Axial R/C Inc.,
8 Goodyear, Suite 125
Irvine, CA 92618
email: scottg@axialracing.com
cell: 949-433-2189

###

Axial RECON Ultra4 G6 2014 at King of the Hammers

blog_recong6_koh

Axial RECON Ultra4 G6 at King of the Hammers

Axial Racing & RECON Crawlers has brought r/c enthusiasts Big Events since 2007. The Axial West Coast Championships started the r/c crawling “Big Events” and was the first to ever have qualifying rounds and LCQ’s. Axial Racing and RECON Crawlers teamed up again to bring r/c enthusiasts and their families an r/c genre that has swept the World, known as the RECON G6. The RECON G6 is more than an event, it’s a Life Style. The King of the Hammers (KOH) and Ultra4 racing is also a life style and they are going to be getting their R/C scaler fix, in The Axial RECON G6. This is the last event on the 2014 KOH schedule starting at noon on Saturday, if you own an Axial R/C, come out and get your fix in this 2nd annual Axial RECON Ultra4 G6.

Axial RECON Ultra4 G6 Intel

2014 Axial RECON G6 Adventure Series Event #1

When – February 8, 2014
Where – King of the Hammers (exact location TBA soon)
Why – Because we’re G6′n and everyone knows it.
Drivers Meeting / Stage line up to start at high noon or 12pm.
Stage Start following the National Anthem. (12:30+/-)
G-Fee – $25.00
15 and Under – $15.00

Bringing a power bar or Monster Ultra Zeros to G-Central is not mandatory, but highly recommended.

-A tow strap is mandatory. This can be a lanyard or shoe lace.
-5 scale items are mandatory. This may include side mirrors, seats, sleeping bags, etc.
-5 medieval scale items are not mandatory, but highly recommended. This could be a sword, shield, hat etc.
-Running the number and name of your favorite Ultra4 racer is not mandatory, but highly recommended.
-A spare tire is not mandatory, but highly recommended.
-A winch is not mandatory, but highly recommended.

If you missed the first ever Axial RECON Ultra 4 G6, don’t miss this one. There will be more of everything, including all the new 2014 RECON G6 classes and awards.

Classes –

- 1.9 Adventurist Class – This class is for all scalers using 1.9 size wheels & tires. It doesn’t matter your driving ability or your truck’s capability, everyone and every truck is capable of finding adventure here.

- 2.2 Adventurist – This class is for all scalers using 2.2 size wheels & tires. If you like big tires, this is your class. The 2.2 Adventurist will face bigger challenges, and their driving ability and scaler capability will be tested, as well. The 2.2 Adventurist has become a premiere class in the RECON G6.

- Expedition Class – “NEW” for 2014 and available at the Birthday Bash G6, – This class is for 6×6’s and scalers with trailers. This class will have more mandatory scale items and is geared towards the builders who enjoy the challenges of driving a 6×6 Truck or towing a trailer. Wheel and tire size are restricted to 1.9’s. Tires must be scale licensed or scale knock-offs. Expedition 6×6’s and G-Rides with trailers will each be awarded.

- RECON Ready Wrangler Modified Class – “NEW” for 2014 and available at the Birthday Bash G6, – This class is for the new Axial Jeep Wrangler G6 kit. Drivers are allowed to run any motor / esc combination, servo of your choice, any 1.9 tire / wheel combination, & battery of your choice. Rear steer and dig are not mandatory, but highly recommended. A winch and Pull Pal are not mandatory, but highly recommended. No AR60 or Wroncho style axles. The Stock body, frame rails, transmission case, and cage must be used. Stock or upgraded parts for the Axial SCX10 may be used, including transmission cases, axle housings, drivelines, steering knuckles, C’s, etcetera. Drivers finding adventure in the RECON Ready Wrangler Modified Class are eligible for a new kit & swag package.

- RECON G6 Driving Diva of the Day Award – “New” for 2014 & available at the Birthday Bash G6,- The best 1.9 Adventurist and 2.2 Adventurist female driver will be receive an award for their efforts.

- RECON G6 Driving Durty Award – “New” for 2014 & available at the Birthday Bash G6. This award will be awarded for the top 1.9 Adventurist & 2.2 Adventurist 15 years or younger.

- Event Credentials and Finishing Tags – “New” for 2014 and available starting February of 2014, – All drivers that pre-register for a RECON G6, will receive event specific credentials to commemorate the RECON G6 they attend and all G6’ers will receive finishing tags upon completing the RECON G6 stage, because “finishing a RECON G6 is like winning a RECON G6.

Bring the Family. Bring your friends. Bring your sense of adventure. The 2014 Axial RECON Ultra4 G6 will have you on the edge of your scale adventure seat. Join us for all the King of the Hammers racing action, including racing action on Axial Blvd. Not only will there be an Axial Adventure trail, but new for 2014, Ultra 4 racing action. Do you like bragging rights? Do you like swag? Do you like being the fastest driver of the day? Night? Week? Then come experience Ultra 4 racing Axial 1/10 scale RECON style.

Come get your scale adventure fix, at the 2014 Axial RECON Ultra4 G6!

To Pre-register for this event, click here!

Please visit RECON on their web pages and FaceBook here….

RECONG6.com

RECON G6 Facebook

Full Option RTR Deadbolt

blog_deadbolt_option

Axial offers several optional upgrade parts for the RTR Deadbolt. Here is a quick run down of what is installed and why you may want to use these items.

A couple photos of the fully option RTR Deadbolt. Axial also offers clear replacement Deadbolt bodies, part number AX04039, for those that want to customize the look of their trucks.
DSC_0092

First option parts that can be seen here are the 2.2 Maxxis Trepador tires in our sticky R35 compound, part number AX12022. We also installed our VMS beadlock wheels, part number AX08061. We will cover more on the VMS wheels later on in this article.
DSC_0096

Body off shot!
DSC_0100

Next option part we installed is a 25t aluminum servo horn, part number AX30836. Axial’s HD aluminum servo horn provides more responsive steering with less chance of stripping the internal splines over the stock plastic servo horn. Clamping style head for secure mounting in high stress applications. Available in 23, 24 and 25 tooth spline counts.

Axial’s HD differential covers, part number AX30829. HD diff covers protect ring and pinion gears from being damaged by rocks, just like their 1:1 counterparts, all while adding a little bling to your ride.

Aluminum axle lockouts are another available option, part number AX30789. Axial’s aluminum axle lockouts are more rigid than the stock plastic lockouts, which will allow the vehicle to track better in all situations.

Another great upgrade is Axial’s aluminum shocks, part number AX30092. Aluminum shocks provide better dampening than the stock plastic shocks, especially when mated with our Delrin shock pistons. Aluminum shock bodies also dissipate heat better than the stock plastic bodies. Oversize 3.5mm shock shafts for rigidity. Great for high power applications and long run times. Axial also offer a complete line of various springs to fine tune your suspension as needed, see the complete parts list below for more info.

Another option part that is hiding behind the HD diff cover is Axial’s HD ring and pinion gears, part number AX30395. HD ring and pinion gears are more efficient than the stock aluminum ring and pinions. CNC machined for precision. Hardened steel for durability. Great for high power applications. Axial also offers hardened steel overdrive ring and pinion gear sets, part number AX30401, for a little extra wheel speed. We also offer an underdrive ring and pinion gear sets, part number AX30402, for a little more torque in binds.

Axial’s HD lower link mounts are another noteworthy upgrade, part number AX30830. Our HD lower link mounts allow users to fine tune ride height and wheelbase by providing more adjustment holes than the stock plastic units.

You can see a handful of options parts in this photo. First option is the aluminum knuckles, part number AX30760. Aluminum knuckles provide more responsive steering and help your vehicle track better at speeds and in the rocks. Another option shown is the Axial Aluminum C-hubs, part number AX30762. Aluminum C-hubs also help your vehicle track more consistently in all situations, especailly when used in conjunction with our aluminum knuckles. Also notice the AR60 universal axles, part number AX30780. Axial universal joint axles increase steering angle to 50 degrees, that’s 60% over the stock dogbone/drive cup setup. These universals provide smoother action for a higher performing, efficient drivetrain. The universal is oversized; typical for 1/8 scale vehicles and made of hardened steel so it’s capable of handling extreme power.

Our intention with this project was to build a solid axled basher that can handle a lot of power. Axial’s Vanguard Brushless System was the perfect fit to supply that power. The 2900KV brushless motor, part number AX24010, is more efficient that standard brushed motors and provides a lot more power for hill climbs and general monster truck style bashing over the stock set-up. Providing control for the brushless motor is our Vanguard ESC, part number AX24260. The Vanguard ESC has an array of features that can be programmed manually or with a Castle Link. Highlighted features include adjustable drag brake, lipo cutoff, traction control, motor timing, etc. Our Vanguard ESC is compatible with both brushed and brushless motors, so it can be run with either configuration. Standard Deans® Ultra Plug® battery connector included.

Another great upgrade is the Wraith Stage One link kit, part number AX30797. This kit is geared towards the Wraith, but also works great with the Deadbolt. Especially if you are going to compete at rock crawling competitions, as the wheelbase falls just under the 12 1/2″ max wheelbase limit. Our Stage One link Kit replaces all the stock plastic suspension links with high quality 7mm diameter aluminum links. Eliminates axle wrap and unwanted axle steer, especially in high power applications. Axial also offers machined heavy duty aluminum straight links, part number AX30790, to replace the stock plastic lower links as an alternative the the Stage One link kit.

Axial’s HD motor plate, part number AX30860. Our heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist! Axial also offers 13t, 14t and 15t steel pinion gears and an 80t spur gear to give end users an array of gear ratios to choose from. Add more torque for low speed crawling to your Deadbolt by installing one of Axial’s optional brushed motors available in 27t and 55t configurations. Axial also offers a complete steel transmission gear set for even more durability, part number AX30708.

Once again for wheels we went with our VWS beadlocks, part number AX08061. VWS wheels allow users to tune foam set-ups and change tires at will for varying terrain and conditions. Another wheel option offered by Axial is our black 8 hole beadlock wheels, part number AX8097. These wheels offer a little wider overall stance which equals stability at high speeds. For low speed rock crawling you can increase your Deadbolt’s climbing abilities by adding Axial’s 2.2 Internal Weight Rings, part number AX30545. Add even more weight by utilizing Axial’s 2.2 Internal Wheel Weights for the Internal Wheel Weight Rings, part number AX30546.

You can see our R35 Ripsaw tires pictured here, part number AX12015. R35 Ripsaw tires offer both a realistic look for the image-conscious scale crawler and for those looking to up their performance game. This 2.2 Ripsaw offers an aggressive tread design, greater ground clearance, and is made from a R35 sticky compound. The VWS wheels include black aluminum rings, but I swapped those out for our Grey beadlock rings, part number AX08133, just to match the grey colored suspension links.

Complete Deadbolt option parts list:
AX8097 – 2.2 Black 8 Hole Beadlock Wheels (x2)
AX08061 – 2.2 VWS Beadlock Wheels (x2)
AX08133 – Grey VWS Beadlock Rings (x2)
AX08141 – 2.2 Trail Ready Beadlock Wheel – Black (x2)
AX08142 – 2.2 Trail Ready Beadlock Wheel – Black and Chrome (x2)
AX12015 – 2.2 R35 Ripsaw Tires (x2)
AX12022 – 2.2 Maxxis Trepador Tires (x2)
AX12021 – 2.2 BFGoodrich Krawler T/A Tires (x2)
AX30545 – 2.2 Internal Wheel Weight Rings (x2)
AX30546 – 2.2 Wheel Weight Inserts (x2)
AX30797 – Stage One Link Kit
AX30790 – Machined Heavy Duty Aluminum Straight Link 101mm (x2)
AX30469 – Machined Heavy Duty Aluminum High Clearance Upper Links (x2)
AX80057 – XR10 Linkage Set (x4 for all 8 links)
AX30395 – HD Ring and Pinion Gear Sets (stock gear ratio) (x2)
AX30401 – Overdrive HD Ring and Pinion Gear Sets (x2)
AX30402 – Underdrive HD Ring and Pinion Gear Sets (x2)
AX30571 – 13t Steel Pinion Gear
AX30569 – 14t Steel Pinion Gear
AX30573 – 15t Steel Pinion Gear
AX30665 – 80t Spur Gear
AX30708 – Steel Transmission Gear Set
AX30829 – HD Differential Covers (x2)
AX30860 – HD Motor Plate
AX30830 – HD Link Mounts (x2)
AX30834 – 23t HD Servo Horn
AX30835 – 24t HD Servo Horn
AX30836 – 25t HD Servo Horn
AX30762 – Aluminum Axle C-hub’s
AX30760 – Aluminum Knuckles
AX30789 – Aluminum Axle Lockouts
AX30092 – Aluminum Shocks (x2)
AX30780 – AR60 Universal Axle Set
AX24260 – AE-3 Vanguard ESC
AX24010 – Vanguard 2900KV Brushless Motor
AX24007 – 55 Turn Motor
AX24004 – 27 Turn Motor
AX04032 – Clear Ridgecrest Body
AX30223 – Black Springs 1.04 lbs/in (x2)
AX30224 – Purple Springs 1.43 lbs/in (x2)
AX30225 – Orange Springs 1.75 lbs/in (x2)
AX30218 – Red Springs 2.07 lbs/in (x2)
AX30219 – White Springs 2.47 lbs/in (x2)
AX30220 – Green Springs 2.85 lbs/in (x2)
AX30221 – Yellow Springs 3.27 lbs/in (x2)
AX30222 – Blue Springs 3.55 lbs/in (x2)