Jeepspeed Cherokee Build

Some of you may recognize this build from the June 2011 issue of RC Driver magazine, page 28 to be exact. The guys over there did an article/interview with me about this build and how it came about. Now that the article is out and in circulation, we wanted to do a little update with more details here on our blog. If you want to read the article in RC Driver, this issue is now available at news stands.

If you haven’t seen the article, I built this SCX10 up to replicate a Jeepspeed Cherokee. I wanted to build a scale replica of the real thing using off the shelf parts that you could find at most hobby shops. Most people don’t associate the term “custom build” with the phrase “off the shelf parts.” But, with a little imagination you can build a one off custom truck with store bought goods. This build started life as an SCX10 Dingo, and the chassis/suspension is still relatively stock. Most of the customization went into the body on this particular build, since that is what most people see first. I started with a Pro-line Jeep Cherokee body, interior, scale accessories and their 1.9 Super Swamper SX tires. Since the 1:1 1700 class is limited to 33 inch tires, a smaller 1.9 tire looks the best for this style build.

For this particular article I am going to concentrate on a few of the scale details that went into this build. Aside from the Pro-line goodies, I also used an array of Axial parts on this build as well, like the narrowed Dingo roll cage, Dingo rear bumper, interior detail kit, exterior detail kit, Honcho bumper, Honcho spare tire mount, aluminum scale shocks, 4 link parts tree, light buckets, etc.

First thing we will cover is the scale interior, and what went into it. I decided to use black, orange and silver for my colors on this rig. So the interior was painted predominately black, with silver and orange highlights. Here you can see the narrowed Dingo roll cage sitting in place to sort out the mounting points. I measured the inside of the roof line on the Cherokee body to determine the width I needed first, then cut the center of the roll cage as needed.

cherokee-140

To mount the cage I used Axial’s rubber shock bump stops at the base of the cage. Then, used long M3 screws to tie everything together once the placement was dialed in.

cherokee-009

More interior detail.

cherokee-007

Custom fuel filler. I made this using black fuel line and a Great Planes nitro fuel line plug (Part #GPMQ4166) for a cap. Reamed a hole in the body smaller then the outer diameter of the fuel line, then pressed the assembly into place.

cherokee-003

Next, I started working on the body. First thing I wanted to add was Axial scale fender flares, as most of the Jeepspeed Cherokee’s run a wide fender kit front, and/or rear. I did trim the fender flares back a little to give them more of a high speed look. Body scissors work great for trimming the flares as needed.

cherokee-010

cherokee-021

Here’s a little closer shot of the trimmed fender flares. Notice I cut the Cherokee fender wells back until the fender flares were even with the hood.

cherokee-013

Once I moved the fender flares up level with the hood, and trimmed the Cherokee Lexan bumpers off, the front of the fender flares end up fairly short. This left me with no holes to mount the very front of the flares to the body. So, I drilled a hole through one of the “dummy” fasteners molded into the flare, then trimmed the head of the fastener off with an X-acto. Now, I can screw the front of the flares down to the body as needed.

cherokee-029

cherokee-040

cherokee-047

I had to cut the backside of the fender flares into small pieces in order for it to not distort the body lines when everything was bolted up.

cherokee-017

After installing the fender flares, I installed the interior to see if there were any clearance issues. Notice I had to cut part of the interior away to clear the backside of the fender flares.

cherokee-072

Here you can see the internal roll cage pretty much sits against the roof line of the body, which should help keep the cab rigid during any high speed rollovers.

cherokee-075

Another Pro-line accessory that I added was their roof rack. I installed a few Axial light buckets to customize it a little too.

cherokee-0771

cherokee-080

cherokee-081

Next I needed some bumpers. The stock Dingo rear bumper was a perfect fit for the Cherokee body. But, the front bumper isn’t really a desert style bumper. So, I decided to see if I could use a Honcho bumper instead. In order to give our Honcho bumper a little more of a pre-runner look, I cut the bottom of the wings off. Then, cut the aluminum inserts that fit the wings into small pieces to look like reinforcing gussets. Also added our big round lights and amber lenses while I was at it.

cherokee-052

cherokee-049

Once again I mocked everything up to ensure a proper fit. It can be a pain to keep assembling everything, just to tear it down again. But, it’s the only way to get everything exactly where it needs to be. Patience is your friend during these steps.

cherokee-088

cherokee-086

cherokee-089

Once the roof rack was mounted and everything fit properly, it was time to start working on the paint job. I laid out the design I wanted as true to scale as I could. Then, weaseled my way into Brandon’s office to see if he could cut me some paint mask for the body. Thanks Brandon!

cherokee-035

I just used basic rattle can paint on this build. After masking the windows and paint job, I gave the body a very light coat of black paint. To ensure the paint wouldn’t bleed under my mask, I let this first coat completely dry before I applied anymore paint. A light first coat, that is allowed to dry, is the best insurance for a clean paint job. That first light coat basically seals the paint mask to the body, and doesn’t allow later coats to bleed under.

cherokee-109

Paint is done! I applied the black first, then the silver outline on the scallops, then the orange last. After that I went back and laid down another coat of black. This did 2 things, one it gives the orange paint a “burnt” look so it isn’t so bright. And two, it’s a pet peeve of mine to look inside a Lexan body to see the same color on the inside as the outside. So, I always back my paint jobs in black.

cherokee-112

With the fender flares installed.

cherokee-114

Shot of the scallops on the hood.

cherokee-116

Applied all the stickers and it was time for another mock up.

cherokee-125

cherokee-126

cherokee-133

The ride height looked a little tall to me, so I made some functional limiting straps out of shoe laces to lower the ride height a bit.

cherokee-226

Last thing I did was install the spare tire and add the other scale accessories from Pro-line.

cherokee-172

cherokee-169

The final product……

cherokee-153

cherokee-184

cherokee-165

cherokee-164

cherokee-157

cherokee-181

SCX10 KIT – Basic Beginners “How To” Build Video: 14-Episodes

Have you ever built a kit? Thinking about building your first kit? If you want to see what it takes to tackle a SCX10 KIT BUILD, you might want to check out this video build series.

Our buddy over at Team Fast Eddy has created a series of videos on Youtube while building his first #AX90014 SCX10 KIT w/Trail Honcho Body over the course of 14-seperate videos. He bills this build as an “Instructional Video Building the Axial SCX10 Page by Page from the manual.

So follow along as TeamFastEddy builds his his first SCX10 KIT and please note that while “Mr. TFE” may not always be politically correct, his build is thorough and he is not coming off as Mr. professional-know-it-all. It’s a simple and thorough follow-along build.

Follow along:
Build the Axial SCX10 #1 Page by Page

Build the Axial SCX10 #2 Page by Page

Build the Axial SCX10 #3 Page by Page

Build the Axial SCX10 #4 Page by Page

Build the Axial SCX10 #5 Page by Page

Build the Axial SCX10 #6 Page by Page

Build the Axial SCX10 #7 Page by Page

Build the Axial SCX10 #8 Page by Page

Build the Axial SCX10 #9 Page by Page

Build the Axial SCX10 #10 Page by Page

Build the Axial SCX10 #11 Page by Page

Build the Axial SCX10 #12 Page by Page

Build the Axial SCX10 #13 Page by Page

Build the Axial SCX10 #14 Page by Page

scx10kitblog.jpg

Axial SCX10 Facebook Mini Prize Give-Away!

This Prize Give-Away is officially over!

First and foremost, we’d like to thank everybody who signed up for our contest.
If you didn’t win or aren’t apart of Facebook don’t be discouraged. We’ll be giving out additional prizes throughout the year.  Please stay tuned!

Congratulations to the following winners:

1.) Bill Brickley – Galesburg, IL
SCX10 (Kit) w/ Tail Honcho body (AX90014) and Axial T-shirts (choose any 3 styles out of 5)

2.) Mitchell Wayne Samuels – Winston-Salem, NC
SCX10 (Kit) w/ CF100 body (AX90007) and Axial T-shirts (choose any 3 styles out of 5)

3.) Danny E. Aceves – Santa Ana, CA
SCX10 TR (RTR) w/ Dingo Body (AX90012) and Axial T-shirts (choose any 3 styles out of 5)

Happy Holidays!

Here at Axial, we’re avid enthusiasts of off-roading and RC in general, so it makes everything that much better when we’re able to launch products that you’ll enjoy and love. Just recently we’ve received a tremendous amount of praise and response for the SCX10 product line, so we would like to show our thanks and appreciation by giving a little back. How? By giving back to all of you that have supported Axial since day one.  This month we’ll randomly choose an Axial friend on Facebook to win one of three SCX10′s. What better way to kick off the holidays.


Enter Axial’s SCX10 Facebook Mini Prize Give-Away to win a brand new SCX10 Kit with Trail Honcho Body and other SCX10 products weeks before Christmas! Talk about easy.

How to Enter:

Just become a friend of Axial on Facebook! Those that are not a friend of Axial will NOT be eligible to win.  Hobby shops that have an account on Facebook and are a friend of Axial are also eligible.  It’s as simple as that. Click here to go to our Facebook page.

The Prizes:

1. SCX10 (Kit) w/ Tail Honcho body (AX90014) and Axial T-shirts (choose any 3 styles out of 5)
2. SCX10 (Kit) w/ CF100 body (AX90007) and Axial T-shirts (choose any 3 styles out of 5)
3. SCX10 TR (RTR) w/ Dingo Body (AX90012) and Axial T-shirts (choose any 3 styles out of 5)

Winners:

Axial will choose at random three people from our friends page with the exclusion of Axial employees.

You have until Sunday, Dec. 13th at 11:59 p.m. to become a friend of Axial (if you aren’t already) for this contest.  If you’re already a friend of Axial, you are automatically eligible to win any of the 3 prizes available.

Winners will be chosen and announced Monday, Dec. 14 by 5:30 p.m. PST.

Good luck and thank you for your support.  Now go hit the trail.

-Team Axial