Project Wrexo – The Ingredients!

Overall chassis shots.

Detailed shots. Here you can see the details of the EXO front end. The front toe block was flipped 180* to get a little more kick-up.

A shot from the top out front. Here you can see one of the chassis braces running from the top of the bulkhead to the upper link mount on the Wraith skid. I also had to clock the steering servo so the servo horn cleared the cage work. It now runs parallel with the front driveshaft, which provides just enough clearance.

A shot of the rear axle and its suspension set-up. I used an old AX10 chassis plate to make the rear shock towers and sway bar mount.

The rear cage has been cut since these photos were taken, in order to mount a full size spare.

A couple finished shots with the spare tire mounted.

The ingredients:
AX90020 – Wraith Kit
AX90015 – EXO Kit
AX30091 – 67 – 90mm Aluminum Shocks (Front)
AX30222 – 14 x 70mm 3.55 lbs/in Blue Springs (Front)
AX30092 – 72 – 100mm Aluminum Shocks (Rear)
AX30224 – 14 x 70mm 1.43 lbs/in Purple Springs (Rear)
AX30825 – EXO Front Shock Tower (Front)
AX30811 – EXO F1 Toe Block (Front)
AX30812 – EXO F2 Toe Block (Front)
AX30815 – EXO Machined Steering Rack (Front)
AX30415 – EXO CVD’s (Front)
AX30781 – Wraith Front Sway Bar (Rear)
AX30829 – Wraith HD Differential Cover (Rear)
AX30402 – HD 43/13 Ring and Pinion Set (Rear)
AX30789 – Wraith Aluminum Lockouts (Rear)
AX30860 – HD Motor Plate
AX80059 – XR10 Lower Link Mount Sleeves
AX24260 – Vanguard Brushless ESC
AX24010 – Vanguard Brushless Motor
AX30836 – 25t HD Aluminum Servo Horn
AX12015 – R35 Ripsaw Tires
AX90001 – OG Axial Scorpion Chassis Plate (Rear upper shock towers)
AX30519 - 101mm x 30* grey links x2 – rear upper links
AXA1420 – 15mm grey post x2 – sway bar links
AXA1421 – 20mm grey post x1 – steering drag link
AXA1424 – 35mm grey post x2 – chassis brace ties upper/lower cage together
AXA1425 – 40mm grey post x2 – front upper links for IFS
AXA1427 – 50mm grey post x2 – steering tie rods
AXA1428 – 55mm grey post x2 – shock braces front and rear
AXA1429 – 60mm grey post x2 – rear upper roll cage supports
AXA1431 – 70mm grey post x1 – front bulkhead brace
AXA1413 – 1mm grey spacer x10 – washers and front upper suspension arms
AXA1414 – 2mm grey spacer x10 – washers, front bulkhead brace and steering drag link
AXA1415 – 3mm grey spacer x10 – chassis brace ties upper/lower cage together
AXA1416 – 4mm grey spacer x10 – rear lower links, sway bar
AXA1417 – 5mm grey spacer x10 – front chassis brace
AX30475 – 74.5mm grey links x3 – rear lower links and rear upper shock mount brace

All links and spacers listed are for the color grey, not red. All red links and the 74.5mm links are now discontinued.

Parts sourced from Vanquish Products.
Vanquish SSZ-Star Wheels (Soon to be re-released)
Vanquish .350 Hubs (Front)
Vanquish .600 Hubs (Rear)