Axial’s Visit to OCRC’s Crawler Course

100_0606_web.jpg

OC/RC Raceway is known locally as one of the go to places for indoor off road racing. Recently they turned some extra space they had into a virtual crawler playground. The terrain ranges from ultra traction surfaces like cement chunks and volcanic rock to more challenging surfaces and obstacles. The ‘random height cylindrical wood pile’ was quite the challenge allowing you to easily get hung up on a diff or high center.

dsc05276_web.jpg

This is the start of the course.  There are a few ways to do it but if you have a stock SCX-10 Trail Honcho I would avoid the ‘random height cylindrical wood pile’.

dsc05277_web.jpg

Once you get past the first section you arrive at the base of the volcano. With its very porous surface grip was not an issue. The SCX-10 Trail Honcho could easily negotiate it. The Honcho was able to get up to the volcano by starting at the cement blocks. I even witnessed a Honcho go from the cement blocks at the bottom to the top of the volcano in about 10 seconds. Line placement was crucial along with staying in the throttle plus a dash of luck but it was impressive to watch.

dsc05278_web.jpg

Next up is the teeter-totter under the OC-RC Mining building. When you come off the volcano you’re at a very steep downward angle. After a little repositioning you can line up on the railroad tracked teeter-totter going up and over. Then you arrive at the ‘Indiana Jones’ style wood planked bridge that runs right above the water. Mistakes on the bridge could be costly! The track owner told me that some guys would cross over the water and then drop off the bridge to the rocks around the water. They would do this by making about a 20 point turn to position themselves perfectly and then use the bridge’s support rope to help hold a rear tire while the front tires made it to the rocks. Needless to say but that’s one route I chose not to take……yet.

dsc05280_web.jpg

Here’s a close up of the teeter-totter. Notice there is an L-shaped piece of aluminum butted up against the left rail. For 1.9 sized tires, like those on the Honcho, you must put your left side into this channel while your right side rode on top the rail. If you want to see if your rigs heavier than your buddies this is the place to do it!

dsc05279_web.jpg

Once across the bridge you come to an island. From here you can go down the wood rails on the left side or traverse the R/C version of tightrope walking. It connects the island to the rock pile table but is hardly visible in the picture.  Once past the rock pile there was another set of tightropes taking you back down to ground level finishing off the course.

dsc05286_web.jpg

The SCX-10 Trail Honcho was a little on the narrow side but still able to make it across. If you have a mini crawler the center rope and the rope on the left would be used as they were closer together. Or you could do what I did and slide your Honcho down the narrower side riding on the axles which was fun to do.

dsc05282_web.jpg

Group Shot! In the back is a 2.2 Competition Crawler. On the bottom left is a mostly stock AX-10 Scorpion and the red SCX-10 Trail Honcho is totally stock.

dsc05303_web.jpg

This little guy got totally hooked on the SCX-10 Trail Honcho. At 4 years old in a matter of minutes he was grasping the concept of crawling pretty well. The stock Honcho took quite a beating, repeatedly rolling down the rock pile, but kept coming back for more!

dsc05305_web.jpg

Another group shot with a few stock SCX-10 Trail Honcho’s and a 2.2 Comp. Crawler. The volcano was about to erupt so we high tailed it out of there to the tetter-totter. The fog machine added a really cool element to the volcano.

dsc05296_web.jpg

He better be careful or the contents in his cooler might spill!

dsc05312_web.jpg

SCX-10 Trail Honcho about to negotiate the waterfall.

All in all it was a great trip and a blast to play on. I’ve done my fair share of racing at OC/RC, which is fun, but the crawling ‘playground’ kept a grin on my face from ear to ear providing hours of entertainment. Aside from having to tighten a few set-screws here and there nothing broke. I had a chance to chat with Robert, the track owner, and he informed me that he may have bigger plans for the course. It’s only going to expand and get crazier from here to which I say bring it on!

6 thoughts on “Axial’s Visit to OCRC’s Crawler Course

  1. I went there too with a completely stock scx 10 TR and it didnt do much exept the bridge, the ropes, and the small rocks. But thats about it. So I guess my question is… HOW DID YOU GET A STOCK HONCHO UP THE VOLCANO???????? Cuold it be the fact that mine isn’t a Honcho or anything? Oh and I forgot to mention they changed the course a little too. You guys should check it out definatly!!!! ;)
    the E Man (AKA) Ethan

  2. It took me a bit (I had the blue truck) to get up to the top but I can do it over ad over now that I know the line. It just takes time and great tire placement.

    also the Honcho has the pack up front, this helps with traction… if your pack is in the rear try relocating it

  3. Yea I tried that already but it didnt help. But ill keep trying. btw nice honcho and do you go to corona del mar? if so we should meet. Check my youtube vids. My Channel is EthanX817

  4. dude sweet i like the course im a beginer,in november i got my first crawler the ax10 (2) rtr its sweet :)

Comments are closed.